T O P I C R E V I E W
|
bigbowen1
Member # 13168
|
posted
351w big bore stroker 351w-454w 4.125 bore 4.250 stroke
engine is brand new, wrapped up from the machine shop. never installed, cranked fired or anything like that.
-215cc aluminum RHS topline heads 64cc combustion chambers -stainless steel roller rockers -comp cams camshaft 35-556-8 114* lobe separation dur @.50 224/236 -hardened push rods -forged probe Pistons 8:5:1 comp -forged scatt h beam rods -forged RPM crank - 4 bolt main iron block from RPM -hydro roller conversion using tybar lifters -arp hardware throughout -High volume oil pump -arp oil pump drive shaft -7qt Moroso fox swap oil pan an pick up tube -ford racing sfi balancer -ram sfi billit steel flywheel -ford racing efi valve covers -ford racing 302 accessory swap bracket -professionally build balance and blueprinted with flywheel and balancer and build sheet
Spent over 10k building it. Call/txt 559-307-8227 [ 2016-10-25, 03:54 PM: Message edited by: bigbowen1 ]
|
bigbowen1
Member # 13168
|
posted
Bump
|
bigbowen1
Member # 13168
|
posted
Bump
|
bigbowen1
Member # 13168
|
posted
Ttt
|
bigbowen1
Member # 13168
|
posted
Bump
|
|