Rear mount turbo kit - Northern California Ford Owners

This is topic Rear mount turbo kit in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=130933

Posted by 04snake (Member # 7448) on :

Pardon the odd post, copied/pasted from tapatalk, this kit could be easily adapted to just about anything, including fox's or late model mustangs

This turbo setup a has been sitting on my shelf since I pulled it off the wrecked blue truck. It is setup for a 4.0 ohv but can really be "adjusted" to work on anything. Originally it was mounted on an 06 5.4 and made 502 HP at the wheels (that particular truck went through a few engines due to a bad tune and the owner cranking the boost to high on various occasions), after that I put it on my ranger but never had it dynoed, I would guess it made around 260-280 at the crank and like 215-225 at the wheels via 7psi. It is a direct bolt on without the air to air intercooler, if you opt to run the cooler you may have to do a bit of fabwork. This will come with everything necessary to run on a pre obd2 truck including fuel system, wideband sensor, boost gauge, oil system and oil scavenge pump. 
 
Kit can be adapted to just about anything if you do your homework. 
 
Details: 
T3/T04e 60 trim journal bearing Garrett turbo. 
38mm turbosmart wastegate with turbosmart 7psi spring 
Turbosmart adjustable boost regulator as well, I never ran it on this truck. This turbo should spin 20+ psi no problem if your heart desires. (Not recommended on stock 4.0's) 
38mm turbosmart external blowoff valve (loud as fuck and drops mad panties) 
Vortech 12:1 fuel management unit with factory style lines 
Wahlbro 255 mph in tank fuel pump 
All turbo hot/cold side piping/clamps/hoses. 
Air to air polished intercooler with brackets that can be made to fit pretty much anything with nominal fan skills. 
Turbowerx exa pump with warranty. 
Stainless steel oil feed line/rubber oil return line to valve cover with modified cap for fitting. 
Digital wideband 02 sensor with data logging capability. 
Mechanical boost gauge. 
Open pcv breather system 
 
Asking 2500 or trade for a better LT setup for my 2002 F150. Will also install for an additional 500 in labor. 
 
The fun factor alone on this setup was the best part, I miss it but it's time to move on. 
 
Have all original receipts totalling over 5k. 
 
530-913-0645

[ 2015-12-14, 03:02 PM: Message edited by: 04snake ]

Fueled by Ford Mustang Owners
on CaliforniaFords.com