This is topic Last chance for parts! '89 ragtop scheduled for the crusher Jan 2. in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=124903
Posted by evintho (Member # 5536) on
:
The time has come to part out Thunderstang. It was a 350 hp turbocharged 4 cyl car. I built it and drove it for 4 years until Bozo the clown rearended me at 40mph and totalled it! The motor and trans went into my '27 T roadster. Most of the interior has already sold locally. The 4-wheel disc brake modified suspension system and some other good stuff will be listed for sale in a week or so once I get it all squared away and cleaned up for photos. This listing is basically for the little stuff.....brackets, moldings and such that I can pull off before the shell goes to the crusher. East coast guys.........this is a rust free California car! Hit me up with a PM for anything you might need!
[ 2014-12-28, 11:03 PM: Message edited by: evintho ]
Posted by KARATExxCHUCK (Member # 12851) on
:
How much would you charge me for the driver side door handle?
Charles ![[patriot]](graemlins/patriot.gif)
Posted by itzdeiontho (Member # 13864) on
:
dimmer switch?
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by KARATExxCHUCK:
How much would you charge me for the driver side door handle?
$15 shipped, $10 if you come and get it.
quote:
Originally posted by itzdeiontho:
dimmer switch?
Are you talking about the rheostat dial for interior lights or the headlight dimmer switch on the turn signal stalk?
Posted by tribesmen (Member # 11900) on
:
How much for the trim around the quarter panels and trunk where you hook the top cover?
Posted by evintho (Member # 5536) on
:
I'll have to check to make sure they're good. The big storm just started so I'll probably have to wait until Friday to check 'em out.
Posted by QuadKing7o7 (Member # 9098) on
:
how are the window trims on the inside? IDK what they are actually called, its the piece toward the bottom of the window, the felt/rubber sh*t
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by QuadKing7o7:
how are the window trims on the inside? IDK what they are actually called, its the piece toward the bottom of the window, the felt/rubber sh*t
I'll check tomorrow if it isn't raining.
Posted by Aztec 5.0 (Member # 13859) on
:
I want the nozzle piece that fits into the cowl grille that sprays the windshield wiper fluid. How much to 95006?
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by Aztec 5.0:
I want the nozzle piece that fits into the cowl grille that sprays the windshield wiper fluid. How much to 95006?
$15 shipped or $10 if you come and get it.
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by tribesmen:
How much for the trim around the quarter panels and trunk where you hook the top cover?
tribesmen........totally forgot! My bad! Will check it out tomorrow, sorry.
quote:
Originally posted by QuadKing7o7:
how are the window trims on the inside? IDK what they are actually called, its the piece toward the bottom of the window, the felt/rubber sh*t
QuadKing7o7.........sent you a PM.
Posted by Aztec 5.0 (Member # 13859) on
:
Does this include the actual piece that connects to the cowl grille? PayPal?
Posted by evintho (Member # 5536) on
:
That is the piece that connects to the grille. It's upside down. You can just see the screwhead in the back.
Paypal is j.olds01@att.net
Posted by Aztec 5.0 (Member # 13859) on
:
Where are you located. If close I'll pick it up if not I'm ready to pay now for shipping
831-331-3563
Posted by itzdeiontho (Member # 13864) on
:
how much passabger moldings
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by Aztec 5.0:
Where are you located. If close I'll pick it up if not I'm ready to pay now for shipping
831-331-3563
I'm in the North Bay. Santa Rosa.
quote:
Originally posted by itzdeiontho:
how much passabger moldings
Please be more specific.
Posted by itzdeiontho (Member # 13864) on
:
The panel under the black trim on the passenger side
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by itzdeiontho:
The panel under the black trim on the passenger side
Door moulding? Fender moulding? Rear quarter moulding?
Posted by Aztec 5.0 (Member # 13859) on
:
Money sent for windshield wiper fluid plumbing
Posted by Aztec 5.0 (Member # 13859) on
:
Can you supply tracking number please
Posted by evintho (Member # 5536) on
:
Yes, I will. As soon as I receive the funds, I'll ship it out and PM you with a tracking #.
Posted by 86_on_DA_machs (Member # 11083) on
:
How clean are those fenders? If you still have them.
Posted by evintho (Member # 5536) on
:
Drivers side is perfect.
Pass side has a tweak on the front edge, otherwise it's good. $50 for the pair. LMK.
Posted by Aztec 5.0 (Member # 13859) on
:
Funds were sent on 12/15 at 8:22 pm
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by Aztec 5.0:
Funds were sent on 12/15 at 8:22 pm
How did you pay?
Posted by StreakMatt (Member # 6257) on
:
Check PM
Posted by evintho (Member # 5536) on
:
PM back at ya.
Posted by Aztec 5.0 (Member # 13859) on
:
My bad man I missed the"1" in the address. Just resent payment. Now I have to figure out how to cancel the other one...
Posted by evintho (Member # 5536) on
:
BTTT.
Posted by evintho (Member # 5536) on
:
To the top.........one last time!
Posted by 93 interceptor (Member # 9457) on
:
Still have passenger fender available? Looking for the lower front fender spat.
Posted by evintho (Member # 5536) on
:
Possible sale pending on fender spats. I'll let you know in the next day or two if he buyer didn't come thru.
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by 93 interceptor:
Still have passenger fender available? Looking for the lower front fender spat.
Sorry, spats sold.
Posted by evintho (Member # 5536) on
:
Vehicle has been crushed!
Fueled by Ford Mustang Owners
on CaliforniaFords.com
