T O P I C R E V I E W
|
70stang351w
Member # 9948
|
posted
Hey CAfords Had this up before the site crashed last. but putting it up because i need to sell ASAP. Lost my job and need to pay bills and with a new baby they just keep pilling up.
Clean Title NOT REG and needs smog - i dont have the cats for it they where toast
96 gt NON CALIFORNIA CAR. I believe was minnesota car had a block heater when the original motor was in it. when the car was bought it was stock except welded in flows and a drop in kn filter, and eibach springs.In the last year when most major work was done the car only saw maybe 3 months of the driving and after the motor swap 3 weeks.
Last year i had added through floor subframe connectors done by Crick, at that time he added the mac prochamber new 02's up front and 03 cobra brakes, new rear calipers and rotors, along with mm ss lines in front and custom rear ss line built by local [place in pacheco, i all so add MM adj Elca's.
-through floor subframes -03 brakes upfront(used front another member) -SS Brake lines front and back(NEW) -Hawk Blue Pads front and back (NEW) -MM Adjustable Extreme LCA (NEW) -MAC ProChamber(NEW) -SVO/Borla SS Side Exhaust(used from another member) -Ford Racing Alumin Drive shaft (Balanced by concord drive line) -steeda shifter
From there i had sacstang driver916 install his 97cobra motor and transmission, we used the gt back half of the tranny so that there wasnt an issue with the mounting. a new rear seal was added at the same time.
Engine Bolt ons/mods 99/01 JLT CAI msd coils Ford Racing a/c delete Ford Racing alumin Fly wheel irmc plates removed and modded using the epoxy method. Flyuidyne Radiator very low milage( bought from a memeber in sac)
appearance - (6 out of 10)at the begining of last year my Fiance started the car up and didnt realize it was in drive and hit the back of my 70 so the front bumper, Hood where replaced front head lights;mach1 chin spoiler added at the same time extra insurance$$. bumpers paint is chipping tho.i have all receipts
94/98 cobra r with 96-98 Cobra Snouts (open) mach 1 chin spoiler (new) Bumper was replaced tinted headlights forgot brand from american muscle.
rear gt vinyl stickers in red
interior- was all grey
-2001 cobra steering wheel -steeda foot pedals -black air bag (from foxbody) -black auto graphed passenger air bag roush(from foxbody) - 98 cobra black leater front seats - black carpet -from hailin - doors (missing speaker grats due to they where broke when i bought them) - black center console - black kick panels - black rear panels - (missing speaker grats due to they where broke when i bought them)
dash,steering colum and doorplates are sprayed with landou black interior paint to match,
i am missing the dash gauge cluster bezel and the radio bezel is cracked. both are cheap fix by foxbody in sanjose.
looking for 3500 obo pink in hand and clean title with car fax.
Trades - not really looking for trades but need parts for the 70 70 mach 1 dash complete, 70 fenders and head light buckets could be used to bring the price down.
thanks
chris
prefer txt 9257269391
[ 2013-10-19, 10:58 AM: Message edited by: 70stang351w ]
|
SIC9250
Member # 8216
|
posted
Gotta post pics man seems like a good deal!
|
70stang351w
Member # 9948
|
posted
Txt responded to. Pics will be up later
Both gt and cobra gauge clusters included, also cobra ecu Gt cluster has red led conversion. [ 2013-05-11, 10:03 AM: Message edited by: 70stang351w ]
|
70stang351w
Member # 9948
|
posted
PICS are UP.
forgot about the MM cast and cambers they where brand new and also installed at same time as through floor subframes brakes and exhaust. i also have the adapter for a temp sensor to be added to the coolant cross over got it from svt forums member. not installed. red top is currently dead trying to recharge it. [ 2013-05-13, 11:01 AM: Message edited by: 70stang351w ]
|
70stang351w
Member # 9948
|
posted
ttt
|
70stang351w
Member # 9948
|
posted
Ttt need this gone
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
ttt
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
Have aftermaket upper control arms and ford racing373 gears for the car also that are oncluded just need bolt kit for the arms that cost 12buck from manufactor
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
ttt obo
needs cats and tune for smog.
will have a vid up later with interior with passenger seat removed to show the thru floor subframes.
the only thing it needs to finish the suspension completely is: MM steering shaft, rear upper bushings that connect upper control arms to housing, better shocks and struts, add mm panhard bar and torque arm, that was my plan for finishing it off anyways and a 4pt.
The Person who installed the suspension and the thru floor subframes is crick from cortex racing. hes not on this forum but i know plenty of people on here know his work and him. His work is top notch. [ 2013-10-19, 11:01 AM: Message edited by: 70stang351w ]
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
Ttt
|
The_Drivah
Member # 8823
|
posted
I want it lets talk 9163466365
|
70stang351w
Member # 9948
|
posted
ttt 3k is as low as i will go.
|
90GTSleeepr
Member # 9609
|
posted
Quick sale
|
70stang351w
Member # 9948
|
posted
Ttt
|
70stang351w
Member # 9948
|
posted
Ttt obo
|
70stang351w
Member # 9948
|
posted
Tttobo
|
70stang351w
Member # 9948
|
posted
Tttobo
|