|
Author
|
Topic: Professional Products Intake, 95 GT parts, 66 mustang parts, SBC, Rims
|
331-66 Coupe
¯
Member # 12453
|
posted
 
 
Professional Products Typhoon Intake, ported and polished
Heat Sink, 30lb injectors, Professional Products Fuel Pressure Regulator, C and L elbow, svo elbow, PMass calibrated MAF sensor, professional products throttle body
Pulled off a 95 5.0 GT to run a carb intake,
550obo
95 GT distributor with MSD cap and wires
75obo
Stock 289 Heads with smog tubes
50obo
Stock 289 shortblock
good for core or for a stroker rotating assembly, needs full machine and rebuild
100obo
TRI-Y headers for mockup, have a leak at flange, flanges have been cut to try and even them up against head
25obo
Plastic SBF valve covers, red
10obo
2 14x7 Torq Thrust D rims with Radial TA's one tire is good other is not one rim has curb rash
150obo
NON FORD
2006 SRT8 jeep rims
all have curb rash, one needs repair as it leaks
300obo
SBC Slant Plug heads 2.02 valves upgraded springs and retainers
200obo
[ December 10, 2012, 07:03 PM: Message edited by: 331-66 Coupe ]
--------------------
'66 Mustang Coupe 331 WC T5 , 06 SRT8 Jeep
Posts: 13 | Registered: Oct 2012
| :
|
|
331-66 Coupe
¯
Member # 12453
|
posted
BUMP
--------------------
'66 Mustang Coupe 331 WC T5 , 06 SRT8 Jeep
Posts: 13 | Registered: Oct 2012
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
