|
Author
|
Topic: Parting Out 91 GT with Maximum Motorsport
|
racsirx
CAFords OG
Member # 1710
|
posted
 
 
Parting out 1991 Black Convertible GT- 83k documented, black interior, black top, 2" Cowl hood, shaved trunk lid, shaved doors with no handles or key holes, new headliner,
Autopower Rollbar,Trunk mount battery with 2/0 cable and a 3g alternator conversion, Trickflow Twisted Wedge 170's heads, new Hypertech Ram-Air, 90mm Lighting MAF
Snow Stage 2 Meth injection, Powerdyne Supercharger rebuilt with uprated parts(but planned on rebuilding and maxing boost capacity)6 psi or 8psi pulleys, Zex EFI Dry complete system with 4 jets up to 150hp I believe, 70mm Hurricane upper/lower intake with 1" spacer, BBK longtubes,
BBK 2.5" H-pipe with cats for longtubes, Flowmaster 2 chambers, Flowmaster Hushpower, R302 Bare Block, new Moroso Girdle with windage tray, new Melling HV pump, Moroso 7 qt pan and pickup, new ARP head bolts, New Clevite main and rod bearings STD/STD, New Total Seal gapless piston rings, new Prothane motor mounts, 42lb injectors, Vortech fuel rails, 2 core aluminum radiator, new Flowcooler aluminum water pump, new silicone hoses,
GForce T-5 synchronized gearset and 28 spline H/D input shaft, McLeod SFI Bellhousing, Pro 5.0 Shifter, new Gforce billet transmission crossmember, new Poly tranny mount, new FMS- Steel input shaft sleeve(retainer) new Fidanza rebuildable Aluminum Flywheel for 28oz, 50oz or zero balance, FMS Aluminum Driveshaft , 8.8 Rearend welded axle tubes to pumpkin with 3:73s, new Powder coated Ford Blue Calipers, new FMS Carbon Fiber friction kit with heavy duty S spring, Summit Racing aluminum gear cover, front brakes are a custom setup that were put together with Hydro assist, new 2011 Mustang GT aluminum calipers,new Focus SVT 12" drilled and slotted rotors, Maximum Motorsports S/S braided lines, new Hawk Pads, 2004 Cobra Hydro assist system - 22k miles- AN-8 fittings, 2004 Cobra Hydro master cylinder - 22k miles, 2004 Cobra rack - 22k miles, Maximum Motorsports - Fox to Cobra conversion steering shaft, new UPR Chromoly K member with Maximum Motorsport SN95 Arms, Autopower 4 point Convertible bolt in Rollbar, new Carrera/QA1 Rear Coilovers 12 way adjustable with H/D upper and lower mounts, new UPR rear Coil-over springs, new Steeda Hollow front sway bar, new Steeda adjustable rear swaybar , new MM K-member 2-point brace, MM 94-95 Front Control Arms - offset 3/4", MM HEAVY DUTY Torque-arm, MM Panhard Bar, new MM XL Series Full-length Subframe Connectors, new MM Coil-over Conversion Kits, new Bilstein HD series struts , new Eibach Front Coil-over springs, new MM Caster/Camber Plates, MM 99-04 H/D Rear Lower Control Arms and mounting bolts(14mm vs 12mm), new MM Solid Steering Shaft, new MM Strut Tower Brace, 94-95 Front Spindles - with hubs machined to 4 lug (allowing use of the 2011 calipers and Focus 12" rotors) , Cobra Rs 4 lug wheels- 17x9 fronts & 17x10 rears with new Fulda Tires 17x245x45f - 17x275x40r
Please bare with me to go through all the boxes of stuff so I can figure out prices, I bought a whole storage unit of parts, I will try to post prices as I go
Maximum Motorsport Strut Tower Brace-SOLD
Cowl Hood-SOLD
FMS Aluminum Driveshaft with no Yoke & U-joints-$100
FMS R-block , bare block, already machined-$1400
Maximum Motorsport Steering Shaft for Cobra Rack-SOLD
Maximum Motorsport Heavy Duty Torque Arm-SOLD
Maximum Motorsport Panhard Bar-SOLD
Maximum Motorsport Full Length Subframes Powdercoated-SOLD
Maximum Motorsport Lower Rear Control Arms-SOLD
Front Bumper-SOLD
Fidanza Aluminum Flywheel-SOLD
TFS Twisted Wedge Heads Pedestal Mount-$700
BBK 1 5/8" Longtubes with H-pipe with Cats-SOLD
Moroso Oil Pan with pickup-$150
Pro 5.0 Shifter for a T-5 SOLD
Summit Racing 8.8 Differential Cover-$100
8.8 Rearend with 3:73 gears, welded axle tubes, no axles, no brakes-SOLD
New 91-93 Convertible Headliner-$150
04 Cobra Rack-SOLD
3G Alternator-SOLD
Vortech Fuel Rails-$150
Shaved Trunk Lid-SOLD
1.7 Rockers-SOLD
New UPR Chrome Moly K-member without control arms-$300
Maximum Motorsport 94-04 Front Control Arms-SOLD
Maximum Motorsport 90-93 Camber Caster Plates-SOLD
Front Bilstein Front Struts-SOLD
17" Cobra Rs-SOLD
Xentec HID Kit-SOLD
Black Front Seats-SOLD
Headlights-SOLD
Fog Lights-SOLD
Black Carpet-SOLD
Front & Rear Coilovers-SOLD
Steeda Swaybars-SOLD
Carrera/QA1 Rear Shocks-SOLD
Maximum Motorsport K-member Brace-SOLD
87-93,New Mishimoto Hose Kit-SOLD
GForce T-5 SOLD
Speedo Cluster-SOLD
[ December 23, 2012, 10:59 AM: Message edited by: racsirx ]
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
mrsmcizzle
¯
Member # 9643
|
posted
How much for the torque arm & panhard bar?
Posts: 166 | From: oakland, ca | Registered: Dec 2009
| :
|
|
50Reasons
¯
Member # 6452
|
posted
.price on k member and arms once you get it off the car also want to know if it changes wheel base
[ November 11, 2012, 01:04 PM: Message edited by: 50Reasons ]
--------------------
50Reasons Car Club President
Daniel/50Reasons
http://youtu.be/n_UkDg_F4MQ
https://youtu.be/066xRvxKy-g
Posts: 9483 | From: Sacramento Ca | Registered: Jan 2006
| :
|
|
FordRyderz510
¯
Member # 6771
|
posted
How much for the hood?
--------------------
Ford Ryderz -Est. 2003
88' GT
96' GT
97' Saleen #17
94' GT-Sold
Posts: 1894 | From: Hayward | Registered: May 2006
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
How much for the MM coil over kit?
Posts: 3653 | From: the land of the lost | Registered: Sep 2005
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
I bought this Mustang mostly in pieces and in boxes, the torque arm and panhard bar are off the car but I will need to go through all the boxes to find the hardware before I decide the price, hood will be $350, I might keep the front coil overs, I need to find time to see if they work with my Strange struts but I won't be using the coils.
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
Wht86drop
¯
Member # 12104
|
posted
How much for the rear coilovers? And does anybody know if they will work on a irs setup?
--------------------
Jalapeña Red 86 GT Vert
Yellow 72 Chevelle
Rio Red 97 Cobra
High-Output Generations CC
Posts: 1669 | From: East Palo Alto, Fiji Islands | Registered: Jun 2012
| :
|
|
REDLIGHTING
¯
Member # 11296
|
posted
How much for k member and part number THX
--------------------
1992 coupe YSI, DART,
225 TFS HIGH PORTS
04 mystichrome convertible
2006 GMC sierra slt crew
Posts: 441 | From: sac | Registered: Sep 2011
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
quote:
Originally posted by REDLIGHTING:
How much for k member and part number THX
It still on the car, never driven on, once I pull it off then I figure out price, I believe it's this one
http://www.uprproducts.com/mustang-pro-series-chrome-moly-k-member-79.html
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
I'm interested in the Fox to Cobra steering shaft.
[ 2013-04-02, 11:39 PM: Message edited by: 925_GT ]
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
97cobra209
¯
Member # 11376
|
posted
How much for the rear lower control arms?
--------------------
2011 GT/CS 5.0
Posts: 872 | From: Stockton | Registered: Oct 2011
| :
|
|
MGee26
¯
Member # 12399
|
posted
How much for the heads?
Posts: 120 | From: 408 | Registered: Sep 2012
| :
|
|
REDLIGHTING
¯
Member # 11296
|
posted
Let me know on the oil pan and pickup also if its new
--------------------
1992 coupe YSI, DART,
225 TFS HIGH PORTS
04 mystichrome convertible
2006 GMC sierra slt crew
Posts: 441 | From: sac | Registered: Sep 2011
| :
|
|
91_Bimini_Coupe
¯
Member # 11641
|
posted
let me know the prices for the panhard, torque arm, the CC plates,and subframe connectors whenever you figure out pricing.
Posts: 190 | From: East Bay | Registered: Feb 2012
| :
|
|
351stang
¯
Member # 7579
|
posted
How much for the baterry relocation kit
--------------------
tows b 4 hoes
Posts: 263 | From: richmond | Registered: Apr 2007
| :
|
|
jayl
¯
Member # 185
|
posted
What's the bore at on that R block Lee? You got a crap load of parts on this one huh haha.
--------------------
Facebook.com/TeamTemporary
8.5's TTFBitch!
Posts: 3821 | From: Hayward | Registered: Mar 2001
| :
|
|
87droptop50
Go Giants!
Member # 7185
|
posted
Pm price on the tourque arm
--------------------
HighSpeed Motorsports
87Mustang Gt Conv kurgan tuned
03Harley F150 #5023
69El Camino SS396 -sold
99 f350 7.3 DRW
Posts: 3855 | From: SF | Registered: Oct 2006
| :
|
|
phildog
¯
Member # 1214
|
posted
Package price on steering rack, shaft and Fidanza wheel?
Pm box is full, BTW.
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
87coupe510
¯
Member # 6150
|
posted
What size are the long tube headers and how much? Let me knwo please. Thanks
--------------------
RAIN OR SHINE I STAY SIDEWAYS IN MY STANG!!!!!!!!!!!
1993 Coupe "Stock" "It's Just Exhaust"
Posts: 1375 | From: EAST BAY | Registered: Oct 2005
| :
|
|
68gtscode
¯
Member # 8679
|
posted
Mailbox is full.
Posts: 293 | From: NM (505) | Registered: Oct 2008
| :
|
|
dean-93
¯
Member # 9401
|
posted
how much for the battey relocate and 3 g alt
--------------------
93 5.0 trickflow h/c/i
Posts: 1175 | From: novato and fairfeild | Registered: Aug 2009
| :
|
|
64 Falcon Dan
¯
Member # 12301
|
posted
Can you tell me more about the T-5 or is it a kit you have for sale? If it is a trans what is the tag part number and if you know what is the first gear ratio?
Thanks
Dan
Posts: 23 | From: Livermore | Registered: Aug 2012
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
quote:
Originally posted by jayl:
What's the bore at on that R block Lee? You got a crap load of parts on this one huh haha.
I believe it's .040, yes I got a lot of parts on this one, I will try to post pics and prices later on.
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
jayl
¯
Member # 185
|
posted
sounds like a good deal then! those guys will go .100 over with a sonic check!
--------------------
Facebook.com/TeamTemporary
8.5's TTFBitch!
Posts: 3821 | From: Hayward | Registered: Mar 2001
| :
|
|
BAD ASS 5.HO
¯
Member # 10947
|
posted
How mutch for t5 tranny and vortech rails?
--------------------
98 boosted/stroked cobra
98 rio red cobra
Posts: 991 | From: modesto | Registered: May 2011
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
