|
Author
|
Topic: Kenne Bell '85 GT Hatch (Beautiful)
|
98 Saleen Cobra
¯
Member # 11679
|
posted
 
 
Hey Guys,
I’m selling the fox for my best friend. The car is very fast and has a ton of tasteful mods. I’ve driven this car and it is solid. Anyways onto the car.
1985 mustang GT Hatch , The speedo was changed and the miles didn’t match up just so you know. The car has less than 80k miles on it, the Odometer reads 51,246.
89 mass air swap CARB legal with proper stickers, less than 20k on motor
Rebuilt motor by Gromm Racing Heads in San Jose CA
Gt-40 heads E-303 cam
Original Kenne Bell 1.5l blower
SCT Big air MAF 24lb injectors 255lph pump, KB BAP
MSD distributor, MSD 6al, 10.5mm Taylor race wires
Kenne Bell ram air box
Shorty equal length headers, bassani hi flow catted midpipe and flowmaster catback, super quiet
Tremec TKO tranny(older w/o shifting issue) and pro-50 shifter, 3.55 trac-lock
Koni yellows, bbk springs, global west mini-torquearm, panhard bar, Full length subframe connectors, Autopower 2 pt rollbar with harness bar
New cross drilled rotors with EBC pads rear disc conversion
Autometer NV tach in dash, Kenne Bell fuel press and boost gauges
BBK 200mph speedo
New head unit and speakers
Low mileage BFG tires on stock 10 holes
Amazing original interior, rear seats are near perfect. Power windows and locks
Has a tune switch in glove box, regular and "bad gas safe mode"
Just replaced p/s pressure line, oil just changed with AMS oil 10-40 full syn and AMS filter
Made 350/427 on dynojet, only have mustang dyno sheet that reads 290/xxx
Problems: needs headliner
Needle fell off fuel pressure gauge
Temp gauge sender needs replacement
Needs driver side mirror
Original paint, shows age but well kept
Stereo isnt working, may be ground or fuse. Worked fine,then car sat and stopped working.
A/C needs recharge
Driver window motor works slow occasionally
Glovebox hatch and fuel door buttons doesn’t work
8K OBO
--------------------
98 Cobra - AED Built Motor - Griggs Racing - Vortech T-trim - Kooks - Aeromotive - T56 Magnum - Built Rear End - HRE's - Baer - AED Tuned
Posts: 22 | From: Campbell, CA | Registered: Feb 2012
| :
|
|
stock fox
¯
Member # 9211
|
posted
Clean hatch glws
--------------------
🏁Sleeper notch under construction🏁
86 Notchback stang
Posts: 1849 | From: Sacramento | Registered: May 2009
| :
|
|
88cobraclone
¯
Member # 10958
|
posted
+1 clean hatch (sell me that kb lol ![[Big Grin]](biggrin.gif) ) glwts
Posts: 1251 | Registered: May 2011
| :
|
|
98 Saleen Cobra
¯
Member # 11679
|
posted
Thanks guys. Spread the word if you can ![[Smile]](smile.gif)
--------------------
98 Cobra - AED Built Motor - Griggs Racing - Vortech T-trim - Kooks - Aeromotive - T56 Magnum - Built Rear End - HRE's - Baer - AED Tuned
Posts: 22 | From: Campbell, CA | Registered: Feb 2012
| :
|
|
98 Saleen Cobra
¯
Member # 11679
|
posted
bump ttt
--------------------
98 Cobra - AED Built Motor - Griggs Racing - Vortech T-trim - Kooks - Aeromotive - T56 Magnum - Built Rear End - HRE's - Baer - AED Tuned
Posts: 22 | From: Campbell, CA | Registered: Feb 2012
| :
|
|
98 Saleen Cobra
¯
Member # 11679
|
posted
bump ttt
--------------------
98 Cobra - AED Built Motor - Griggs Racing - Vortech T-trim - Kooks - Aeromotive - T56 Magnum - Built Rear End - HRE's - Baer - AED Tuned
Posts: 22 | From: Campbell, CA | Registered: Feb 2012
| :
|
|
MA FIDY
¯
Member # 11816
|
posted
will ur boy sell KenneBell seperate??
Posts: 15 | From: manteca | Registered: Mar 2012
| :
|
|
98 Saleen Cobra
¯
Member # 11679
|
posted
Sorry man but he's not looking to separate.. bump ttt..
--------------------
98 Cobra - AED Built Motor - Griggs Racing - Vortech T-trim - Kooks - Aeromotive - T56 Magnum - Built Rear End - HRE's - Baer - AED Tuned
Posts: 22 | From: Campbell, CA | Registered: Feb 2012
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
