T O P I C R E V I E W
|
1sick65
Member # 3957
|
posted
In the next month or so i will be needing to purchase the folloing, let me know what you have
F cam Fox timing cover Front sump oil pan T5 tranny 650 CFM Holley DP Some type of 302 carb 4 barrel manifold MSD 6AL-2 3G alternator King cobra clutch Full length headers for 65 mustang
|
allmotor65stang
Member # 6668
|
posted
IN box is ful so here we go..PM if interested..
i have a mildon front sump oil pan and a set of 1-5/8 headers all from my 65 mustang.also a edelbrock performer manifold. asking price is 280. 150 for pan 80 for hedman headers and 50 for performer manifold.Oil pan is not even a year old looks new still [ December 08, 2010, 06:31 PM: Message edited by: allmotor65stang ]
|
Secnd2nun64
Member # 1431
|
posted
I got a 650 dp holley. Make me an offer. Have a timing cover too but it wont work for you if you have a mechanical fuel pump.
|
1sick65
Member # 3957
|
posted
Secnd2nun64 - how many miles on the carb, is it modified at all?
|
SixtyMMan
Member # 9161
|
posted
I have the oil pan $30 and the 289, 302 Headers $55
(707)704-8281
|
Secnd2nun64
Member # 1431
|
posted
Not many, maybe 5,000 miles, I dont drive my mustang very often. I bought it brand new from vic hubbards for my supercharger to run inside the paxton box. Found out it was the wrong carb for a blower and bought myself a nice new $800 blow thru carb. The carb came with a manual choke setup but I took it off when I installed it. Other than the choke plate being removed and some jet changes it was left alone. The choke horn is still there so you can still put a choke back on it. I'll sell if you offer a fair price.
The part number on the box for it is 04777-c
http://www.summitracing.com/parts/HLY-0-4777C/ [ December 10, 2010, 04:41 AM: Message edited by: Secnd2nun64 ]
|
Nasty Notch
Member # 8863
|
posted
I have a t5 pm me if intrested
|
70mach351
Member # 7528
|
posted
ive got a demon that needs a rebuild, and i also have a king cobra clutch for a 26 spline tranny.
|