|
Author
|
Topic: Edelbrock heads/ welds n slicks/ roller rockers Fore Sale
|
2BlueGeeTees
¯
Member # 4702
|
posted
 
 
Edelbrock performer rpm heads with stage 3 TEA port job 2.02/1.60 60cc O ringed, 3/8 stud heads. These came off of JohnB's 11.0 combo. I ran them for three passes and changed my combo. Since the heads were disassembled and checked out and are in excellent condition. $800 disassembled and complete ready to be put back together. $900 assembled.
FRPP 1.6 3/8 stud mount rockers also off johnb's 11.0 combo in great shape $100
16 comp pro magnum 1.73 7/16 stud mount roller rockers 15 passes on 8 of the 16 $200
8 comp pro magnum 1.6 7/16 stud mount rockers 15 passes $100
weld draglites with radials up front and 26X11 et streets in the rear. Wheels are 15X8 15X3 4 lug. Comes with center caps and lug nuts 15 passes on everything. $800
Posts: 2316 | From: Vacaville | Registered: Jul 2004
| :
|
|
Ryan_LX
¯
Member # 7089
|
posted
interested in the heads and rr but i need to find out if they are too big for my stock bottom end first
Posts: 1718 | From: no where | Registered: Sep 2006
| :
|
|
2BlueGeeTees
¯
Member # 4702
|
posted
I believe they are too big for the pre 87 flat top pistons or which ever year it is. The came off of a stock bottom end 93 cobra. If you have a flat top piston it would have to be notched to accept the bigger valves
Posts: 2316 | From: Vacaville | Registered: Jul 2004
| :
|
|
Ryan_LX
¯
Member # 7089
|
posted
I have a 90 I need to do some research
--------------------
Jesus is king!
Posts: 1718 | From: no where | Registered: Sep 2006
| :
|
|
2T0NE
Go 49ers
Member # 4216
|
posted
Talk to 93pony or johnb they can give you the get down on the notching and clearence issues,also great deal on those heads ,I've heard great things about tea port work ..ttt
[ August 03, 2010, 08:49 PM: Message edited by: 2TONE ]
--------------------
Originally posted by x Raelsmar x:
Can't wait till the Giants lose tomorrow night so all you Giants fans are forced to shut the fuck up.
Posts: 14676 | From: 760 carlsbad | Registered: Mar 2004
| :
|
|
2BlueGeeTees
¯
Member # 4702
|
posted
The port work is really nice and on that stock 90 the notching will depend on how much cam you plan to run
Posts: 2316 | From: Vacaville | Registered: Jul 2004
| :
|
|
*EPIK*
¯
Member # 7481
|
posted
These heads will work on an 87-95 stock bottom end with a crappy e cam or similar cam. I know this because I run the same heads on my notch...
[ August 03, 2010, 10:50 PM: Message edited by: EPIK ]
--------------------
=91 Notch:12.31@110 **Under Construction**
=05 CTS-V: 418rwhp/393rwtq=13.01@111
http://www.djepikmusic.com
Posts: 6966 | From: 916 | Registered: Mar 2007
| :
|
|
|
|
Cm4hawks
¯
Member # 5231
|
posted
quote:
Originally posted by 2TONE:
Talk to 93pony or johnb they can give you the get down on the notching and clearence issues,also great deal on those heads ,I've heard great things about tea port work ..ttt
turbo50 knows alot on the cam/size valve combos too. knows his stuff too
--------------------
2007 Ford Expedition
2004 Dodge Ram 2500
Posts: 1818 | From: Pacheco CA | Registered: Jan 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
