This is topic Autometer CF Gauges, Autometer Pods, SCT, 42lb Inj, Edelbrock, Corbeau Price Drops! in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=079354

---

Posted by essasin (Member # 4741) on :
 
Dropping all the prices 5-20 bucks. Going to try to clear out the garage by the weekend.

Auto Meter 4737 Carbon Fiber Short Sweep Electric Water Temperature Gauge - $20
Reads from 100-250 degree F
Gauge diameter is 2-1/6”

Does not come with the sending unit as I unfortunately did not take it out from the motor that I sold. Nothing much to say except it’s in good condition.






Auto Meter 4701 Carbon Fiber Boost / Vacuum Mechanical Gauge - $25 pending
Reads from 0-30'' Hg / 0-20 PSI
Gauge diameter is 2-1/6''





Auto Meter 4721 Carbon Fiber Mechanical Oil Pressure Gauge - $20 pending
Reads from 0-100 PSI
Gauge diameter is 2-1/6”

Does not come with the sending unit as I unfortunately did not take it out from the motor that I sold. Nothing much to say except it’s in good condition.





[ July 15, 2010, 12:40 AM: Message edited by: essasin ]
 

---

Posted by essasin (Member # 4741) on :
 
Autometer Dual Center Gauge Pod 94-98 - $15 pending
No scratches and looks great. Comes with the mounting bracket




Autometer A Pillar Gauge Pod 94-98 Convertibles - $10
In excellent condition. However it is still attached to the car so I am not sure if the screws will be reusable. The mounting screws are flat but I will try to take them out gently but I can not guarantee they will be usable.



[ July 15, 2010, 12:41 AM: Message edited by: essasin ]
 

---

Posted by essasin (Member # 4741) on :
 
Edelbrock Adapter For EFI Intake Manifolds - $55
70mm bore diameter
Lightweight Cast Aluminum
Gray/Silver Powdercoated Finish

Excellent Condition. Purchased last year and only has dyno time on it. Took it off because I went with a different intake setup. It comes with the CARB sticker, certificate, gasket and the original invoice from summit.









[ July 15, 2010, 12:01 AM: Message edited by: essasin ]
 

---

Posted by essasin (Member # 4741) on :
 
Black Corbeau Forza Seats with sliders 79-04 - $180

Purchased these from Sk8OnGlass a 1 ½ - 2 years ago. They are in the same condition bought them in as I never drove the car. There are some wear and tear. They are in good condition but I will try to go into detail all the negatives for full disclosure. Back on the passenger seat as pictured, the cushion of the driver seat where your thigh rest has a tiny hole as pictured, and the passenger butt cushion has some wear but no rips on the fabric.






[ July 15, 2010, 12:01 AM: Message edited by: essasin ]
 

---

Posted by essasin (Member # 4741) on :
 
42lb Ford Racing Injectors - sold on corral

I purchased these from another member on this board two years ago. I can't remember his sn but I believe at the time he worked at Nextgen. I picked them up in Hayward if the member still happens to be on the board. I was told it had 5-6k miles on them and I put about 30 minutes of dyno time on them.




[ July 15, 2010, 05:10 PM: Message edited by: essasin ]
 

---

Posted by SydeWaySix (Member # 3596) on :
 
hey brian, how do those seats feel/fit? I kow they're non-adjustable but I just need a pair in the mean time while I try to find a nice set of recaros or 03/04 cobras. Are the brackets made for mustangs?
 

---

Posted by essasin (Member # 4741) on :
 
SCT 4 Bank Chip - $115
I can remember exactly what tune it has on it now. I am 90% sure it's for 12psi 302. It was originally purchased from Bob Kurgan. It does not include the switch knob.






[ July 15, 2010, 12:02 AM: Message edited by: essasin ]
 

---

Posted by essasin (Member # 4741) on :
 

quote:

---

Originally posted by SydeWaySix:
hey brian, how do those seats feel/fit? I kow they're non-adjustable but I just need a pair in the mean time while I try to find a nice set of recaros or 03/04 cobras. Are the brackets made for mustangs?

---

quote:

---

Originally posted by essasin:

quote:

---

Originally posted by SydeWaySix:
hey brian, how do those seats feel/fit? I kow they're non-adjustable but I just need a pair in the mean time while I try to find a nice set of recaros or 03/04 cobras. Are the brackets made for mustangs?

---

I honestly don't know how they feel for more than 15 minutes. They are comfortable for a wide waist (I have about a 33" waist) and the bolstering for the legs are pretty good. But it is fixed back so your back will sit upright. The bracket is for a mustang.

*edit about the passenger bracket - I just remembered I had to modify the bracket as the holes did not line up to the seat. They did sit evenly.

I currently have someone on CL that emailed me saying he wants them. But if he does not get back to me tonight you can try them overnight. Bolt them up and see how you like them.

---

sounds good, please let me know!
 

---

Posted by essasin (Member # 4741) on :
 
np Ian TTT
 

---

Posted by Mach103 (Member # 746) on :
 
Where you located at??
 

---

Posted by essasin (Member # 4741) on :
 

quote:

---

Originally posted by Mach103:
Where you located at??

---

quote:

---

Originally posted by Mach103:
If its possible can you please find out how much it would to ship the injectors maybe USPS in this flat rate box's hopefully its not mare then 5-8 bucks.... zip code is 95961.... thanks Mario.

---

quote:

---

Originally posted by M&M Performance *BlownMach1*:
if the sct chip is for a 87-93 fox with 12psi i will take it for sure!

---

quote:

---

Originally posted by SikWiditMke:
Can the seats be both used for a driver side seat? Because i ask is my sister needs a new driver seat and i do also.. We both have the gangster lean.!.!

---