T O P I C R E V I E W
|
BlownMach1
Member # 5400
|
posted
this motor is all new, never ran! i have the receipts for the rotating assembly. the crank is hawk racing 4340 forged 408w stroker crank and has not even been balanced yet,no holes drilled! the rods are hawk racing 4340 forged h-beams with chevy rod journals with arp rod bolts, the pistons are Probe srs forged with dish and tfs valve reliefs. the heads are old school aluminum TFS twisted wedge with the ferrera valves and i believe the older tfs aluminum heads come with HD valvesprings. these heads are new never ran! the rockers are Harland sharp i belive.i also will include 2 oil pans, a brand new mildon race pan for old school mustangs and a 351 fox conversion pan kit! also comes with brand new comp cams solid roller lifters with the guides on them. the motor also comes with arp main studs installed and arp head studs, a timing cover, a holley air cleaner, and a bigger carb mechanical fuel pump with -an fittings installed.
FIRST PERSON WITH $3000 CASH GETS THE WHOLE PACKAGE! THIS IS A GREAT DEAL SO I WOULD LIKE TO SELL COMPLETE BEFORE I PART IT OUT. IF I DO PART IT WILL ONLY BE AFTER THE SHORTBLOCK IS SOLD!
|
Notch_notch
Member # 8902
|
posted
wat kind rockers? its 1.7 - 7/16..
|
BlownMach1
Member # 5400
|
posted
idk for sure but i think they are 1.6 and 3/8 studs but idk honestly. they may be 7/16? i never really looked at them that closely. the studs do look pretty big, ill have to make sure and look tomorrow. [ April 07, 2010, 12:25 AM: Message edited by: BlownMach1 ]
|
BlownMach1
Member # 5400
|
posted
TTT....so i guess im willing to part it out if nobody buys it complete by this weekend so let me know what u guys need
|
BlowN67
Member # 4229
|
posted
might need the front sump pan/pick up.
anything i have for trades on short or long block?
also who assembled the shortblock?
|
BlownMach1
Member # 5400
|
posted
sorry john i can not accept trades at the moment. i need money for other parts i have put a deposit on and need to pay off..lol and the shortblock is only pre assembled, nothing has been torqued yet! just lubed and put together to make sure everything has clearance!
|
1965FALCOON
Member # 8773
|
posted
what would the compression be with those heads on the motor
|
BlownMach1
Member # 5400
|
posted
it should be around 9.8-1...or so. the block has been zero decked so if the pistons would have been flat top the car wouldnt run on pump gas so i had to go with a dish so it would be good on pump gas!
|