T O P I C R E V I E W
|
STANGSALLY76
Member # 5342
|
posted
I have a few parts im no longer going to need no trades cash only i can't recive pm's so if interested just call me @916-676-3947
1.world products 200cc 2.02/1.60 64cc w/ mild port work springs good to .600 lift $500
2.rpm 2 upper/lower show polished in excelent shape also w/1" spacer sold
3.accufab 70mm t/b and spacer show polished excelent condition sold
4.f303 cam used great shape good for mild street and boost $100
5.lunati hyd roller cam 51018 used great shape perfect n/a or nitrous up to 200 $150
6.ford racing tall polished valve covers show polished great condition sold
7.306 short block in excelent shape k/b hyper, pistons 0.30 stock crank, rods redone just add your cam, heads,ect also have all recipts very,very low miles sold
8. qa1 tube k-member, a-arms, upr caster/camber plates, upr coil-over kit, upr bump-steer kit, everything is new in boxes sold
9.auburn pro diff w/moser axles 31 spline 5lug fox length 3" studs, w/ axle bearings and seals, ford racing 4.10 grears, moser rear support girdle this is everything you need to build that bullet proof rear-end for your fox mustang all parts are new in boxes sold
10.ford racing raditor aluminum 4 row with flex-a-lite s-blade extream and canton aluminum over-flow can everything is like new and in excelent shape sold also have chrome blue oval performance upper and lower radiator and hoses and steeda stainless radiator top hold-down for $50 more.
11.canton 7qt pan with crank scraper pick-up tube and dip stick excelent shape sold
12.energy suspension urathane motor mounts great shape $50
13.jba shorty headers smog leagle little rusty but sound good with no leaks $40
14.power master 140amp alternator like new $100
15.pa comp c4 trans with reverse manual v/b and 9.5 3500 converter with anti-balloon plates used in great condition also sfi shield sold but still have 9.5" ptc converter ill take $200 for it
16.ptc 9.5" converter for a c4 26spline 4500 stall used great condition sold
17.march billit aluminum pulleys w/ new power steering pump with march pulley, billit a/c delete with tensioner w/ billet pulley excelent shape with hardware sold
18.wieand polished water-pump in great condition sold
19.agx quick ratio power steering rack also comes with urathane offset rack bushings everthing is new $200
20.lower race pully this is not the standard underdrive pulley used but great shape $40
21.1969 302 block very hard to find its 0.30 bore will clean up perfect @0.40 $200
22.1989 302 longblock out of 89 coupe pulled 3 weeks ago running like shit very high miles good solid re-builder $150
23.few set of early 289 small chamber heads and a set of early 302 heads good rebuilders $50/pair
if you are interested just give me a call @916-676-3947 [ January 26, 2010, 01:21 AM: Message edited by: STANGSALLY76 ]
|
STANGSALLY76
Member # 5342
|
posted
also forgot i also have new rear suspension
1.granatelli motorsports weight jackers lowers w/adjustable spring perches these are the exact same as maximum motorsports extream duty lowers
2.double adjustable uppers
3.steeda spherical upper bushings
4.comp engeneering sub-frame connectors
everything is new in boxes ill take $400 for everything
also a set of upr rear axle tube braces i will throw these in for $50 [ January 22, 2010, 06:53 PM: Message edited by: STANGSALLY76 ]
|
EPIK
Member # 7481
|
posted
your pm box is full
|
STANGSALLY76
Member # 5342
|
posted
i can not recive pm's so if your interested just call me thanks.
|
F_R_A_N_C_O_I_S
Member # 9475
|
posted
do u hav any pics of the canton 7qt pan
|
STANGSALLY76
Member # 5342
|
posted
i have no pics its in excelent shape its black and also tapped for a supercharger oil return also has plug for n/a if you need to see one check summit.
|
SHORTSHIFTER89
Member # 7810
|
posted
pm sent
|
need-a-cage
Member # 5415
|
posted
Damn, you have a lot of stuff I want!
Who polished the intake? Is it the Performer RPM2? I know they have a polished version that they sell. Is this it or did you polish?
|
STANGSALLY76
Member # 5342
|
posted
quote: Originally posted by need-a-cage: Damn, you have a lot of stuff I want!
Who polished the intake? Is it the Performer RPM2? I know they have a polished version that they sell. Is this it or did you polish?
its the RPM-2 the part #37-7120 it was polished by edelbrock but it did not look that great so i had it redone and now it looks way better now.
|
STANGSALLY76
Member # 5342
|
posted
the rear-end stuff is gone so are the valve covers.
|
warhorse58gt
Member # 7702
|
posted
what it eh canton pan for?
11.canton 7qt pan with crank scraper pick-up tube and dip stick excelent shape $150
|
STANGSALLY76
Member # 5342
|
posted
79-95 302
|
WickedStang
Member # 7692
|
posted
On our way!
|
STANGSALLY76
Member # 5342
|
posted
front suspension and c4 trans pending sale
|
89TRUNK
Member # 2506
|
posted
So the c4 and converters are sold?
|
need-a-cage
Member # 5415
|
posted
Do you ever come towards Santa Rosa?
I want the intake and throttlebody spacer but it will be tough to go to Sac.
|
STANGSALLY76
Member # 5342
|
posted
quote: Originally posted by 89TRUNK: So the c4 and converters are sold?
i still have the 9.5 ptc 3500 ill take $200 just need it gone.
|
STANGSALLY76
Member # 5342
|
posted
quote: Originally posted by need-a-cage: Do you ever come towards Santa Rosa?
I want the intake and throttlebody spacer but it will be tough to go to Sac.
sold them this morning.
|
SHORTSHIFTER89
Member # 7810
|
posted
Do you still have the alum rad and fan?
|
Wicked Motorsports
Member # 8702
|
posted
quote: Originally posted by STANGSALLY76: front suspension and c4 trans pending sale
Thanks for the stuff Lmk if anything else comes up,and let me see what I have..
|
STANGSALLY76
Member # 5342
|
posted
sounds good
|
STANGSALLY76
Member # 5342
|
posted
quote: Originally posted by SHORTSHIFTER89: Do you still have the alum rad and fan?
yes.
|
EPIK
Member # 7481
|
posted
Tried to reply to your PM about the heads last week, but your box is full....
|
STANGSALLY76
Member # 5342
|
posted
ttt
|
SHORTSHIFTER89
Member # 7810
|
posted
thanks stangsally for the partss
|
Duncan Motors
Member # 7045
|
posted
im for sure getting these heads in the next couple days.
|