|
Author
|
Topic: Gobs of Aftermarket stuff. Epic list
|
r3dn3ck
¯
Member # 3192
|
posted
 
 
Ok... scored a few things for sale. They'll be on ebay Saturday afternoon so get your paypal finger ready and jump on these deals. A buddy of mine had some crud taking up space and wanted me to sell it for him. I have possession of all items:
1. 1x like new (customer didn't like it) Steeda Tri-ax for 3650, no handle. 01.5+ GT's and 01 cobra. 110 shipped
2. 1x like new pro5.0 shifter for T56 with handle 110 shipped
3. 2x Struts + 2x Shocks. Saleen Racecraft from a Stage 3. Car was converted to full race right off the showroom floor. Car had 1500 miles. These things are like new in all seriousness. 200 + shipping. You can not get a better deal on what appear to be Bilstien fronts and Carerra rears.
4. Aeromotive 13103 FPR for 5.0 cars. Brand spankin new. 80 + shipping.
5. 3.3" Chicane racing blower pulley for Saleen Supercharged cars and possibly others. 6 rib. 100 bucks shipped.
6. 3.5" Chicane racing blower pulley for Saleen Supercharged cars and possibly others. 6 rib. 100 bucks shipped.
7. DSS 3/8" stud mount BILLET aluminum 1.6 roller rockers. Fully rollerized, like new. Former owner wanted more lift almost immediately after install. Dyno time and a run to carls jr on them. 180 shipped. They're glossy black and bitchin lookin. Shame to hide them under valve covers.
8. C&L upper plenum for 96-04 cars. It's the small PCV model. 100 + shipping.
9. 2x Vortech boost pipes for 5.0 cars. Could work on newer cars but no promises. Like hella old but not even dirty. 50 bucks each.
10. Comp Cams 5.0/5.8L Hyd/Roller blower cam. .533/.544 224/230 114lsa. Comp 284H-R14. Brand new. 200 bucks + shipping.
11. Maximum motorsports coil over top bearing plates. If you have MM kit and don't have a backup set of top bearing plates you're definitely going to want them. It's the only part of an MM kit that ever wears out and MM is GREAT about replacing them but they take a couple days to ship a replacement which can leave you stuck in a lurch. 70 bucks gets both front bearing plates and torrington bearings shipped to you.
12. NOS nitrous fogger nozzle. Takes standard flare jets. Good for someone piecing together a kit. 20 bucks shipped. BRAND NEW IN BOX.
13. Stainlesss steel braided front brake lines. New. Just lines, no banjo bolts. DOT approved. 75 shipped.
14. Charles Alston's Chassisworks driveshaft loop (loop only, no bars). Weld-on. BNIB. 5.5" diameter. 50 shipped.
15: LPW aluminum diff cover w/ preloads. Near new. Was going to use it but decided not to. Waiting for a replacement pre-load bolt from LPW. Fits cars wtih PHB's including S197's. 110 + shipping.
16. BRAND NEW Centric front rotors (painted center) for 97-2003 Toyota Tacoma WITH NEW Sumitomo Ceramic pads. 100 + shipping.
17. Pro-Flow calibrated MAF for 96-01 mustangs. 80mm. Cal'd for 24lbs injectors maybe... Make offer above 50 bucks.
18. T5 bellhousing for foxbody. If you wanna swap a v8 in you need this part. 75 + shipping.
If you really need pics I'll post them. These are all like new parts or very very close to it.
I don't have a lot of wiggle room on these but there may be some. Ask or you won't find out. send email to cburnss at gmail dawt com if you want something really bad.
I'll post pics if you're interested in them.
--------------------
Good judgement comes from experience, experience comes from bad judgement. Via O'Connor
Posts: 202 | From: Bay Area | Registered: Aug 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
