T O P I C R E V I E W
|
Justa2V
Member # 3749
|
posted
Front wheels are brand new and haven't been on the car yet, the rear wheels were test fitted for clearance issues. I would like to get back as close to what I purchased as possible which was $657 o.t.d but I will take $550 for all 4 wheels, tires not included. Serious inquiries only please. Pics will be up later today. [ February 12, 2009, 11:17 PM: Message edited by: Justa2V ]
|
Justa2V
Member # 3749
|
posted
There's more pics available;
|
5LiterSpeeder
Member # 8234
|
posted
Do you know if these would fit on a foxbody mustang with rear disk without any MAJOR clearance issues? If so i am very interested. TTT for some sicky rims
|
Justa2V
Member # 3749
|
posted
They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
|
Cobraboy
Member # 7826
|
posted
quote: Originally posted by Justa2V: They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
You don't need to take off the quad shock... just unbolt it, flip it around, then bolt it back up. It will clear because you will have the thinner part of the shock in the area where the tire/rim is.
|
5LiterSpeeder
Member # 8234
|
posted
Quad shocks are long gone.
|
Justa2V
Member # 3749
|
posted
Solves that.
|
jordan_0806
Member # 5888
|
posted
quote: Originally posted by Cobraboy: quote: Originally posted by Justa2V: They will work with one of 2 different ways, either way they'll stick out a bit; spacers or rolling your fenders and if you do sothe only 315 that will fit will be the Nittos, everything else will need to be a 285/40ZR17 to work. I've installed this application a couple times on foxes. Also make sure to remove your quadshock or else it'll hit.
You don't need to take off the quad shock... just unbolt it, flip it around, then bolt it back up. It will clear because you will have the thinner part of the shock in the area where the tire/rim is.
Brock, you know nothing about foxbodies, stop posting....
|
Justa2V
Member # 3749
|
posted
So yeah if anyone's interested, PM me the wheels are just chillin' in my garage.
|