This is topic Incon 800TT VERY complete kit $3500 in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=059969
Posted by 514 Mullet (Member # 7402) on
:
This is the most complete Incon setup I have seen. Although it is possible some minor part is missing, I took very thorough pictures of everything this morning. The kit come with the correct injectors and mass air including the original flowsheet. The heat shields are accounted for. Along with correct mounting brackets for the intercooler. The longer bolts and spacers to make room for the intercooler are also there. And the bracket to move the evap canister. Notchplate was built from original specifications. I had it all mocked up on my white coupe before I purchased another car and chose to put the coupe back to stock and nothing seemed to be missing. And I am quite thorough about things so I doubt I would miss anything. Either way, this is why I spent over an hour pulling everything out and taking pictures before repacking it away. What you see in the pictures is exactly what you will get. Everything is in excellent condition.
916 224-1864 Fred
[/img]
[ October 08, 2008, 02:02 PM: Message edited by: 514 Mullet ]
Posted by GOT 50 (Member # 1960) on
:
Why couldnt you have posted this 3 days earlier. Just purchased a YSi trim vortech. Intereszted in a trade?
Thanks
Eric
Posted by 93PONY (Member # 60) on
:
This kit is more complete (by the pics) and looks nicer than the Incon kit on my car. It's also got the *Rare* adjustable wastegate actuators. Wish I had those.....Then I could adjust my boost.
Where did you find this kit Fred?
Posted by 514 Mullet (Member # 7402) on
:
Well Shaun, after searching for 3 years, this one showed up on corral and I made immediate arrangements to buy it. The seller had recently moved from Alaska to Washington and I met him in Medford Oregon to pick it up. He purchased it sometime back from the original owner and it never made it out of the boxes again til I bought it. I just have no use for it at this time. I will buy another Mustang later to put it on though if it doesnt sell. Its the one thing I always wanted to put on a Mustang. If that kit leaves, I will never build another foxbody. Anything else would be a downgrade IMO.
Posted by 93PONY (Member # 60) on
:
It's a nice kit.
It's got the 'upgraded' 42lb injector option AND the Actuator upgrade.
It's also one of the older kits (like mine) as the Maff is super long.
Damn nice find!
The only suggestion I have is for whoever uses it to run oil restrictors before the turbos. Ball Bearing turbos should have these restrictors is place as they don't need a lot of oil like non-ball bearing turbos. I don't know why they weren't included in the kits. But I've got them on my kit. It'll eliminate any oil burning issues due to the combination low mount of the turbo & small drain back hose. (1/2" ID)
Posted by jordan_0806 (Member # 5888) on
:
ttt
to those who want REAL power.....
Posted by 514 Mullet (Member # 7402) on
:
Guess this is back ttt.
Fueled by Ford Mustang Owners
on CaliforniaFords.com