|
Author
|
Topic: F.S NEW 408 STROKER RACE MOTOR
|
STANGSALLY76
¯
Member # 5342
|
posted
 
 
I may be changing projects so i need to
sell my big motor its 13.5 to 1 and set-up
for n20 but will run hard n/a also
1974 351w 9.5 deck
scat 4340 crank
scat 4340 liteweight i-beams
je/srp flat-tops 4.030 w/capscrews
milodon fox 7qt pan w/tray
comp solid roller 630 lift 110 lc 256/260 @50
comp solid roller lifters
pro gears timming set
comp pushrods
harlan sharp 1.6 roller rockers
victor jr heads w/ comp springs titanium retainers
and very exstensive port work
victor jr intake
holley 1050 dominator
msd pro-billet small cap w/bronze gear
im asking $6500 from carb to pan
or $3000 for the shortblock only
call for details 916-676-3947
[ April 18, 2008, 06:44 PM: Message edited by: STANGSALLY76 ]
--------------------
92 LX deep into the 10's on the motor with street tires coming soon
its just a little small block
Posts: 1133 | From: Sacramento | Registered: Feb 2005
| :
|
|
92LSCSE
¯
Member # 7689
|
posted
Will this setup play nice with EFI?
Posts: 39 | From: Carmichael, CA | Registered: May 2007
| :
|
|
kingmoochr
¯
Member # 5834
|
posted
sure, with a tune or aftermarket efi, anything will play nice. will it bolt onto a stock ecu? not a fucking chance in hell
Posts: 881 | Registered: Jul 2005
| :
|
|
STANGSALLY76
¯
Member # 5342
|
posted
yes but you will need a anderson pms or a
fast system and a someone that knows how
to tune .
--------------------
92 LX deep into the 10's on the motor with street tires coming soon
its just a little small block
Posts: 1133 | From: Sacramento | Registered: Feb 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
