|
Author
|
Topic: WTB 289/302 block & heads
|
mnstruc
¯
Member # 5652
|
posted
 
 
I need a 289/302 short block and heads in decent shape to rebuild for my '65 race car. I am pulling my 5.0L/331 stroker and going back to a vintage legal set up.
I am willing to pay a reasonable amount, or trade a race prepped 351W non roller block (.030 over, new cam bearings, new brass freeze plugs and ARP main studs), with a forged steel crank (.010/.010), plus 6 Eagle SRP rods (two others got a little bent up). The block has been mag'd, machined with a torque plate and is ready to assemble.
My 331 short block will go up here after I get the new motor built.
--------------------
63 Fairlane 500
65 GT-1 Mustang Race Car
67 Mustang A code Coupe
68 Ranchero GT
72 Bronco Sport
03 Mustang GT
07 F-350 4x4 Dually Diesel
Posts: 95 | From: Sunnyvale, CA | Registered: May 2005
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
i may know someone that has a bare 302 roller block, and i should have some stock 302 heads in a week or 2.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
03Cali_Svt
¯
Member # 6301
|
posted
i got a '85 306 BARE BLOCK and a set of stock heads ill let go for $150
--------------------
R.I.P Willie Guzman u will be missed
Aka 1Qwk5ohhhhhh......
'03 Ox White LIGHTNING "
'90 Faleen "under construction"
Posts: 675 | From: SAN JOSE | Registered: Dec 2005
| :
|
|
1sick65
¯
Member # 3957
|
posted
i have what your looking for... its a once bored 289 from my 65 mustang that needs to be prepped and rebuilt also have 289 heads that need to be gone through-Nick
Posts: 1457 | From: Sacramento,CA | Registered: Jan 2004
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
i just had a customer in my shop i'm doin a motor swap on he had low compressoin on 3 clinders lowest was a 100. the guy said the motor was just built 2 years ago from a freind in shop class at high school.the car ran good just not so good on power.but started an idled good .on inspection of tear down.the heads had one bad sucked exaust valve an 2 more on the way.but everything else was in really good shape .nothin to racy more vintage stock orintated.all new stuff. as far as i can see get the head fixed an put back to gether.no oil pan oil pump pickup,no timing chain cover intake distrbuter .short block is still assembled comes with flywheel an harmonic balancer.the motor u can tell was in good shape.just took out yester day.u should give me a call for more details .i was gonna try to keep an put back together an resale but he wanted it but no place to take he's tryin to find a spot right now.good deal for some one.i say again this a good motor nothin major to do,they didn't put harden seats in the heads.everything else is in good shape.stock bore a rv cam, 66 heads, 65 or 66 block stock, bore but new pisons, aftmarkt valve springs,comp cams roller tiped rocker arms good oil presure at all times.if u wanted a good quick inexpensive motor this is the one. call for more details. 707 554 4988 or 707 297 0868.
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
925five.0
¯
Member # 3292
|
posted
check with racsirx i believe he still has one.
Posts: 559 | From: -925- | Registered: Sep 2003
| :
|
|
talaposa
¯
Member # 2460
|
posted
I've got what you need. 1965 block has been cleaned. I'm running the heads on my 63 ranchero. The heads have been fully ported with chevrolet 1.94 and 1.60 valves. I have a set windsor heads that have also been ported that will replace those (gets me into regular gasoline) The early heads give me 10.2:1 compression with the stock 302. Ask me and I'll send pictures
Posts: 91 | From: Auburn,CA | Registered: Feb 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
