T O P I C R E V I E W
|
93PONY
Member # 60
|
posted
Ported GT40 Iron heads (original 93 Cobra heads). Ferrera 6000 1.94/1.60 valves Milled to 61cc's Cut for dual valvesprings PS 3 Dual valvesprings with 145lbs seat pressure & 425lbs open at .600 lift. Fresh valvejob less than 1000 miles. In 3500lb car ran 11.1 @128mph with 13psi boost.
$500 firm Will be at SacRaceway on Saturday the 20th....can bring the heads if there is an interested buyer.
|
93PONY
Member # 60
|
posted
ttt
|
ProjectFox87
Member # 7048
|
posted
trade you some p heads and bbk long tubes?
|
93PONY
Member # 60
|
posted
quote: Originally posted by ProjectFox87: trade you some p heads and bbk long tubes?
I have no use for those heads, nor the longtubes. I'b be stuck selling those....I'm not really interested in doing all that to get rid of these heads.
|
BlowN67
Member # 4229
|
posted
who did the port work? Still pedestal mount rockers right? thanx JOHN
*EDIT* never mind the ? one the pedestal mount. went an looked at the first pic... Are the rockers included? [ January 19, 2007, 09:08 PM: Message edited by: BlowN67 ]
|
93PONY
Member # 60
|
posted
I did the portwork. I've done dozens of heads. The wife's VicJr's were done by me. It's the fastest N/A car on the site.....& not a lightweight either.
The heads are pedistal mount. Heads come complete & fully assembled.
|
jordan_0806
Member # 5888
|
posted
hmmm...thats actually more of what I want...too bad I would need to sell a set of heads 1st...
anyone want some RPM heads????lol
|
Team SOLO
Member # 722
|
posted
quote: Originally posted by 93PONY: I did the portwork. I've done dozens of heads. The wife's VicJr's were done by me. It's the fastest N/A car on the site.....& not a lightweight either.
The heads are pedistal mount. Heads come complete & fully assembled.
I got you covered on the motor
|
asskickn88
Member # 4957
|
posted
quote: Originally posted by jordan_0806: hmmm...thats actually more of what I want...too bad I would need to sell a set of heads 1st...
anyone want some RPM heads????lol
I could sell my Performer heads to buy your RPM heads so you could buy the GT40's!
|
93PONY
Member # 60
|
posted
quote: Originally posted by Team SOLO: quote: Originally posted by 93PONY: I did the portwork. I've done dozens of heads. The wife's VicJr's were done by me. It's the fastest N/A car on the site.....& not a lightweight either.
The heads are pedistal mount. Heads come complete & fully assembled.
I got you covered on the motor
Lemme refraise... Fastest N/A EFI SBF on pump gas....on this site.
|
Team SOLO
Member # 722
|
posted
quote: Originally posted by 93PONY: quote: Originally posted by Team SOLO: quote: Originally posted by 93PONY: I did the portwork. I've done dozens of heads. The wife's VicJr's were done by me. It's the fastest N/A car on the site.....& not a lightweight either.
The heads are pedistal mount. Heads come complete & fully assembled.
I got you covered on the motor
Lemme refraise... Fastest N/A EFI SBF on pump gas....on this site.
Well dammit...there goes my title
|
93PONY
Member # 60
|
posted
quote: Originally posted by Team SOLO: quote: Originally posted by 93PONY: quote: Originally posted by Team SOLO: quote: Originally posted by 93PONY: I did the portwork. I've done dozens of heads. The wife's VicJr's were done by me. It's the fastest N/A car on the site.....& not a lightweight either.
The heads are pedistal mount. Heads come complete & fully assembled.
I got you covered on the motor
Lemme refraise... Fastest N/A EFI SBF on pump gas....on this site.
Well dammit...there goes my title
Correction again.... Drew (Yellow94GT) just ran 10.81 @125mph today....beating my 10.85....so it's now the 2nd fastest N/A EFI SBF on pump gas....no wait a minute...Drew was running Race gas....so I guess I can keep the title as long as I keep the 'on pump gas' in there. LOL
TTT! Somebody buy these heads or I'm boxing them up & putting them in storage!
|
MJMJ7
Member # 7398
|
posted
I'm trying like hell to justify buying these.
|
93PONY
Member # 60
|
posted
Sold. Thanks SilverLX!
|
silverLX
Member # 3207
|
posted
Thank You!
|