T O P I C R E V I E W
|
Konman
Member # 10420
|
posted
My plans have changed for the 240Z project so I would like to sell all of my Ford stuff I have accumulated over the years owning three Mustangs.
I am firm on the prices...if they are too high for you please move on.
$1400 -- bought from 70Mach351 on this forum 385w full roller stroker shortblock 1974 Forged Pistons - boost (low compression) H-beam rods Not sure if the crank is forged All ARP bolts DSS main girdle Crane or Comp bar style roller lifters Roller cam
$200 NIB Comp cams Duration 270/276, Lift .512/.512, Ford, 5.0L
$550 GT40X heads- Mild port job -- 1/2 head bolts where on my 351w Milled to 58cc Valve springs are good for .700 lift AFR guideplates Crane 1.6 rr's $500 World Class T5 + bellhousing $150 95 Cobra upper and lower intake $125 -- bought from Haulinass (didn't tell me about the bolt) 95 Cobra upper and lower itnake - ghetto spray painted on the car...bought like that one broken bolt in the lower intake
$275 --SOLD GT40 5.8 EFI lower intake
$150 each 1991 Mass air harness and A9L computer 1989 Mass air harness and A9S computer -- SOLD $75 Ford 24lbs inj
$120 CL 76mm mass air for 24lbs
$90 NIB ARP stepped head bolts to use 351w heads
$250 Eaton posi unit with 3.55 gears ---assembled $150 Factory H-pipe...only used for smog. Still looks brand new
$30 each 1/2" intake spacers GT40
$40 Koni single adj rear shocks 15K (Foxbody) [ December 13, 2012, 07:58 PM: Message edited by: Konman ]
|
Duncan Motors
Member # 7045
|
posted
dam gd deals on some stuff there.
|
925_GT
Member # 11891
|
posted
PM sent.
|
89FxBdy
Member # 11121
|
posted
quote: Originally posted by Duncan Motors: dam gd deals on some stuff there.
+1
|
Konman
Member # 10420
|
posted
Thanks guys...honestly not trying make $$$ on the parts. Will keep them if they don't sell.
|
925_GT
Member # 11891
|
posted
quote: Originally posted by Konman: Thanks guys...honestly not trying make $$$ on the parts. Will keep them if they don't sell.
I didnt get a reply. Are the heads still for sale?
|
Konman
Member # 10420
|
posted
Yes, heads are still available. I just replied to all the PM's in order received.
They have 10K on them and were on my other 351w.
|
notch_306_stang
Member # 7266
|
posted
Pm sent
|
Konman
Member # 10420
|
posted
All pm's have been replied to.
|
90coupe50
Member # 10848
|
posted
Pm sent
|
Konman
Member # 10420
|
posted
ttt
|