T O P I C R E V I E W
|
LXjames
Member # 10791
|
posted
looking to see if anyone has some goods laying around. would like gt40 non p heads maybe an e or b cam and a gt40 intake lmk cash in hand but im not rich
|
Greasy
Member # 5258
|
posted
I've got a brand new Anderson N-41 cam and some used Extrude honed TFS Twisted Wedge heads.
|
79 cobra
Member # 10137
|
posted
got a crane cam for sale askin 100 obo
heres the specs
Crane Camshaft Specification Card Part Number: 444225 Grind Number: POWERMAX 2031 (FORMERLY COMPUCAM 2031) Engine Ident: 1985-UP FORD-MERCURY V-8 302 CU.IN. H.O.
VALVE SETTING: INTAKE .000 EXHAUST .000 ----> HOT
LIFT: INTAKE @CAM 302 @VALVE 513 ROCKER ARM RATIO EXHAUST @CAM 311 @VALVE 529 1.70 ALL LIFTS ARE BASED ON ZERO LASH AND THEORETICAL ROCKER ARM RATIOS
CAM TIMING OPENS CLOSES ADV DURATION @ .004 INTAKE 28.0 BTDC 68.0 ABDC 276 ° TAPPET LIFT EXHAUST 75.0 BBDC 27.0 ATDC 282 °
SPRING REQUIREMENTS TRIPLE DUAL OUTER INNER PART NUMBER 99841
LOADS: CLOSED 120 LBS @ 1.940 OR 1 15/16 OPEN 347 LBS @ 1.440 RECOMMENDED RPM RANGE WITH MATCHING COMPONENTS MINIMUM RPM 2000 MAXIMUM RPM 5500 VALVE FLOAT 6500
CAM TIMING OPENS CLOSES MAX LIFT DURATION @ .050 INTAKE 0.0 BTDC 34.0 ABDC 107 °ATDC 214 ° TAPPET LIFT EXHAUST 47.0 BBDC (7.0) BTDC 117 °BTDC 220 °
REMARKS: FIRING ORDER: 1-3-7-2-6-5-4-8
|
JBeezy53
Member # 3960
|
posted
Since you're going the budget route I got an Explorer upper and lower for $100.
|
JBeezy53
Member # 3960
|
posted
I may still have some regular GT40s laying around too.
|
LXjames
Member # 10791
|
posted
man thanks that was hella quick. jbeezy ill take the intake and to 79 cobra and greasy if i like the idle quality and its design (spray or force fed and operating range) ill see whats up.
|
79 cobra
Member # 10137
|
posted
its more ment for na but will work for boost/nitrous no problem also very good idle little choppy but idles great and vacumm stayed around 16-18 @ idle [ December 01, 2011, 11:02 AM: Message edited by: 79 cobra ]
|
79 cobra
Member # 10137
|
posted
heres the spec for the n-41 both good cams upp to your choice
N-41......222/232 .512/.512 w/1.6 rocker 110 106
|
LXjames
Member # 10791
|
posted
just looked up both. both have good idle quality and system campatability if i dont get this e cam for cheap i will definately see whats up. but brett you know you gotta do lower than 100, after i hooked you up with an underdrive pully for 10 bones!!!! cmon bro remember the good time we had lol give a brother a discount
|
norcalfiddy
Member # 11207
|
posted
hey lxjames, is this the dude thats friends with mondo? with the white lx? im that dude that came over white that white pickup that one day we were workin on his car lol
|
LXjames
Member # 10791
|
posted
oh shit whats up bro i didnt even know but yea man you gonna have to come threw to the apt and help that goes for rambo aka foxx5.0 to we havin a 302 teardown party lol
|
norcalfiddy
Member # 11207
|
posted
quote: Originally posted by LXjames: oh shit whats up bro i didnt even know but yea man you gonna have to come threw to the apt and help that goes for rambo aka foxx5.0 to we havin a 302 teardown party lol
hell yea im down, my lx should be on the streets soon, just need smog and transfer in my name
|
Big block 66 f100
Member # 8867
|
posted
I know you said you didn't want p's but I have a set with the headers to go with them...
|
LXjames
Member # 10791
|
posted
ttt
|
FOXX5.0
Member # 9094
|
posted
quote: Originally posted by LXjames: oh shit whats up bro i didnt even know but yea man you gonna have to come threw to the apt and help that goes for rambo aka foxx5.0 to we havin a 302 teardown party lol
WEN will this happene I'm down to give a hand
|
LXjames
Member # 10791
|
posted
Bigblock66f100 how much?
|
Big block 66 f100
Member # 8867
|
posted
250 with the headers
|
LXjames
Member # 10791
|
posted
Bigblock66f100 hit me up 9252853708
|
LXjames
Member # 10791
|
posted
ttt
|