T O P I C R E V I E W
|
turbo50
Member # 6700
|
posted
sold [ January 23, 2011, 12:12 AM: Message edited by: turbo50 ]
|
cali95gt
Member # 8940
|
posted
left a message. Will call tomorrow to talk details
|
nycreep50
Member # 9735
|
posted
PM SENT
|
Ryan_LX
Member # 7089
|
posted
have paperwork?
|
turbo50
Member # 6700
|
posted
FYI for those interested. Didnt think id have this much interest.
The pistons are specifically for TFS heads if I remember right. The motor is still in the car as a long block so I have to get it out and the get the heads intake cam stripped off then I will be ready to sell.
Take about a week as I have to rely on my father cuz Im in a wheel chair right about now.
|
turbo50
Member # 6700
|
posted
quote: Originally posted by Ryan_LX: have paperwork?
No but the pan is off so you can see the arp rod/mains and see the pistons are low compression blower pistons. I do have receipts for when the rings and bearings were bought and the crank turned if thats what you are looking for but i build my own shit.
|
Ryan_LX
Member # 7089
|
posted
quote: Originally posted by turbo50: quote: Originally posted by Ryan_LX: have paperwork?
No but the pan is off so you can see the arp rod/mains and see the pistons are low compression blower pistons. I do have receipts for when the rings and bearings were bought and the crank turned if thats what you are looking for but i build my own shit.
Was I talking to you by pm's a few weeks ago about this?
|
2TONE
Member # 4216
|
posted
Hey turbo50,glad to see your doing better,we were supposed to me last year at the mopar meet ,but I didn't make it,hopefully ill see u there this year...but anyways I got a buddy who might be interested in this 306..ill see what he says ..ttt
|
turbo50
Member # 6700
|
posted
quote: Originally posted by Ryan_LX: quote: Originally posted by turbo50: quote: Originally posted by Ryan_LX: have paperwork?
No but the pan is off so you can see the arp rod/mains and see the pistons are low compression blower pistons. I do have receipts for when the rings and bearings were bought and the crank turned if thats what you are looking for but i build my own shit.
Was I talking to you by pm's a few weeks ago about this?
No
|
nycreep50
Member # 9735
|
posted
Pm sent
|
Ryan_LX
Member # 7089
|
posted
Oh ok, so this setup is specifically for trick flow heads only?
|
turbo50
Member # 6700
|
posted
quote: Originally posted by Ryan_LX: Oh ok, so this setup is specifically for trick flow heads only?
no pistons are cut for both
|
Ryan_LX
Member # 7089
|
posted
What's the balance?
|
turbo50
Member # 6700
|
posted
......50 oz...........
|
AR_Stang
Member # 10223
|
posted
4 bolt main? Whats the block rated to?
|
turbo50
Member # 6700
|
posted
quote: Originally posted by AR_Stang: 4 bolt main? Whats the block rated to?
block kas seen 600 its a 2w bolt stock block, hence the pricing.....
|
Cstang50
Member # 4925
|
posted
ttt for a good person to deal with built my motor and its been running strong for almost 2 years
|
Ryan_LX
Member # 7089
|
posted
Called twice please get back to me when you get a chance, - Ryan 510-552-9049
|
turbo50
Member # 6700
|
posted
sold
|