T O P I C R E V I E W
|
rickm347
Member # 5323
|
posted
let me know what you have please....thanks --rick
|
GRIGGYJAMESJIMBO
Member # 6319
|
posted
EDIT [ February 07, 2007, 09:14 PM: Message edited by: GRIGGYJAMESJIMBO ]
|
ProjectFox87
Member # 7048
|
posted
I HAVE ONE 916 617 8180
|
PoLiCe iNtErCePtOr
Member # 7232
|
posted
i got that 4 u!!!
|
rickm347
Member # 5323
|
posted
whatchu got homie???
|
ugotsmoked
Member # 6069
|
posted
got one...916-821-4053
|
rickm347
Member # 5323
|
posted
everyone flaked. . . . . . still looking...thanks --rick
|
90lxfoxbody
Member # 6947
|
posted
I have a 90 forged piston short block that has a high volume oil pump compucam 2031 cam was freshed with rings and bearings about 10000 miles ago...With trick flows and a holley sytem max intake makes 330 n/a whp and has 60 psi oil pressure and good even compression across the cylinders.....You can hear it in the car if you like...Pulling out next week for new motor.Also has a new timing chain and gears when i did the cam install. would like to get 600 bucks for it.obo
|
rickm347
Member # 5323
|
posted
Fresno is deep. . . . . .im not sure i can get down there. very good deal that i would most likely pick up if it was closer thanks --rick
|
F8LSN8K
Member # 7080
|
posted
quote: Originally posted by 90lxfoxbody: I have a 90 forged piston short block that has a high volume oil pump compucam 2031 cam was freshed with rings and bearings about 10000 miles ago...With trick flows and a holley sytem max intake makes 330 n/a whp and has 60 psi oil pressure and good even compression across the cylinders.....You can hear it in the car if you like...Pulling out next week for new motor.Also has a new timing chain and gears when i did the cam install. would like to get 600 bucks for it.obo
600 bucks?????!!!!
daaaaaaamn!!! thats hella cheap!
hey rick, i say make the drive.....if i had the money i'd go to africa for that deal.....why so cheap?
|
90lxfoxbody
Member # 6947
|
posted
thats just the short block.I have a set of ported e7s and a extruded honed stock upper and lower to go with it for 1100 if you would like.For 1200 i will throw it together with 1.7 rockers....We could possibly meet half way.
|
90lxfoxbody
Member # 6947
|
posted
Why so cheap you ask lol...No i dont need it anymore got a new motor that is almost done,so my come up is someone elses come up.....Just let me know...Like i said its in the car and runs like a top right now.Would like to sell the whole motor so let me know...This setup in a decent prepped 3200lbs car will get ya in the 12s.
|
ugotsmoked
Member # 6069
|
posted
i still have one.100 bucks, come pick up today.
|