T O P I C R E V I E W
|
STEED
Member # 4787
|
posted
Going a different direction with a build. Figured even though this is a ford site there may be some interest.
This is a complete longblock, intake to pan w/flywheel.
All Receipts and paperwork on build.
Quick Specs: Cam = 240-250 @50/ 112LC/ 600 lift Compression = 10.5:1 Intake = Edelbrock Performer RPM Air-Gap(Rectangle Port) Port matched to heads Heads: Procomp Aluminum w/ SI stainless valves Pistons: SpeedPro Forged Aluminum Rods: Scat Forged Crank: Cast GM Dampner: Professional Products Oil Pan: Summit 7qt(blk)
Motor was built to make 500hp at the crank N/A on pump gas.
Built by Clay & Paquette Engine Machine Shop in Yuba City.
Built on 6/11/10 Motor is wrapped and has not been opened since completion.
Make Offer
[ January 16, 2012, 11:05 AM: Message edited by: STEED ]
|
98z28
Member # 8408
|
posted
Cp performance built my buddy's 496 stroker that makes about 650 on pump gas NA, he builds good shit!
|
STEED
Member # 4787
|
posted
Yeah they are pretty good with builds. This was for a 70 R/S Camaro, but the car has since sold, so this baby is taking up space as you can see.
|
Drop top D
Member # 10558
|
posted
What are looking to get ?
|
STEED
Member # 4787
|
posted
quote: Originally posted by Drop top D: What are looking to get ?
You can see what went into it, so make an offer.
|