Author
|
Topic: Trick Flow 170 Heads, Performer RPM, and Custom Cam Package!!
|
Camara90
1%
Member # 134
|
posted
This setup was on my car for 1500 miles tops. Setup was on a stock block 302. The Heads are trick flow 170's with a custom valvetrain to hold the custom cams lobe profiles (Not a mail order valvetrain). Performer rpm has a ported lower by tmoss porting. This lower matches these heads perfect. The upper has been opened up to a 75mm Throttle body. Custom Cam was designed by hi-tech to run hard and pass CA smog, as you can see it did both well!! Also included with this setup will be a set of Scorpion 1.6 stud mount roller rockers, trick flow pushrods, fms lifters, and the comp cams timing chain. This is a complete setup that runs in the 11's at a best of 114mph NA with shorty headers and 3400lb race weight with a c4 behind it. In a lighter car mid 11's at 116+ would be very attainable and smog legal. All parts are cleaned up and ready to install! 1600firm!!!
Dyno at AED 356rwhp and 350tq.
Time slip-
Heads-
TEA stock Trick Flow 170 heads, 61cc, with following valvetrain. 1.25 Titanium Retainers +.050" 7* 11/32 Max pressure 1.300 dual springs 160@1.800 450@1.200 1.080 coil bind Stefs Machined Steel .505 1.300 Spring cups Crower 7* +.050 11/32 valve locks .496 x .341 Viton Valve Seals 1.800 Install Height
Intake- Performer rpm 1, with lower ported by tmoss porting to match the heads. Upper ported to 75mm throttle body opening. Has some appearance issues from hitting hood from tall solid motor mounts.
Cam- Custom Hi-tech cam. 224/220 .574/.512 with a 111 lobe sep. Cam card will be given with purchase.
Lifters- Ford Motorsport lifters http://www.summitracing.com/parts/fms-m-6500-r302
Pushrods- Trick flow 6.7 hardened for guide plates http://www.summitracing.com/parts/tfs-21406700
Roller Rockers- Scorpion Race Series http://www.summitracing.com/parts/scc-scp1018bl/overview/
Timing Chain- Is a comp cams set, dont remember model number.
Price is 1600 firm!!! [ 2014-11-09, 11:33 PM: Message edited by: Camara90 ]
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
Who resurfaced the heads?
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Camara90
1%
Member # 134
|
posted
heads are not resurfaced, just cleaned.
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
Very good deal you have there should go quick.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Camara90
1%
Member # 134
|
posted
Thanks, I thought it was pretty fair. Hate to see it all go, but onto bigger and faster.
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
jmcclesk
Moderator
Member # 1355
|
posted
quote: Originally posted by Camara90: Thanks, I thought it was pretty fair. Hate to see it all go, but onto bigger and faster.
do tell
-------------------- Ford trained ASE master tech.
Posts: 4024 | From: marrysville | Registered: May 2002
| :
|
|
Big Dave
¯
Member # 13142
|
posted
Wow, I have pretty much that combo, different cam, but your power is much better! Well done.
GLWS
-------------------- 86 GT Vert with some mods. Yup
Posts: 165 | Registered: Aug 2013
| :
|
|
phildog
¯
Member # 1214
|
posted
How many miles on this setup?
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
Camara90
1%
Member # 134
|
posted
No more then 1500 miles. Car barely gets driven.
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
phildog
¯
Member # 1214
|
posted
So all the moving parts have 1500 miles?
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
Camara90
1%
Member # 134
|
posted
Yes.
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
Camara90
1%
Member # 134
|
posted
quote: Originally posted by jmcclesk: quote: Originally posted by Camara90: Thanks, I thought it was pretty fair. Hate to see it all go, but onto bigger and faster.
do tell
Dart block 347, Tw 11r 205 heads, Vic Jr, custom cam, and some other fun stuff. Should be a fun setup!
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
Camara90
1%
Member # 134
|
posted
Sold. Thanks, Cafords.
-------------------- 92GT,stock short block,9:1 TFS 170's,perf rpm,custom cam,1 5/8 shorties,C4 trans. std. 356hp, 350tq 11.85@111.9mph on motor.
Posts: 2351 | From: 707 | Registered: Jan 2001
| :
|
|
|