|
Author
|
Topic: 89 5.0L Motor Complete $150
|
turbo50
¯
Member # 6700
|
posted
 
 
89 GT motor complete. From throttle body and 10 pin down to oil pan, with stock headers, all accessories. I have primed it and it has good oil pressure. I am including maf. Motor had a rough life, I believe. #8 has 100 psi and #2 and #3 have 0psi, unless you put a plug in either side. Regardless be a good core because oil pressure is great and there is no water/oil mixed. I dont have time or I would install new head gaskets and have the heads resurfaced and send it down the road.
Asking $150. It is complete.
Dan
415-720-3012
[ August 13, 2007, 06:26 PM: Message edited by: turbo50 ]
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
ttt
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
HYFLOHDS
¯
Member # 4198
|
posted
just got off the phone with you, send me pm with directions.
--------------------
Hyperflow Motorsport
Flow testing & PortingService
Authorize Superflow SF-600 Test Garage.
friscospeed@gmail.com
415-756-5717 DM only
Posts: 308 | From: san francisco | Registered: Feb 2004
| :
|
|
turbo50
¯
Member # 6700
|
posted
Sent you a PM and left you a phone message.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
Dave you put me on your ignore list. I am hoping it was by accident as we were in the middle of sending messages back and forth.
Take me off if you want to continue...thanks.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
adding a pic.
needs cleaned up but has all the parts and is a good core. I would just slap head gaskets on it if I had time.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
ttt
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
