This is topic Dyno Day in forum Events/Shows/Cruises at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=000956
Posted by Throttle Stop (Member # 5515) on :
 
Hey all

We are supposed to be having a dyno day with SacStangs.com, but there's something wrong with their website. We're not sure if they're still planning on doing it, so we're going to open it up to Ca Fords.

On Feb 25, for 3 pulls with A/F, HP, and Torque printout, $60.00. NO TUNING.

If anyone knows what's happening with SacStangs, like if they're still planning on this, or what's going on, please let us know. Also, if you want to get in on this dyno day, post up here and we'll get you taken care of. Or, you can call us at: The Throttle Stop, 1200 Plumber Way, Roseville, Ca. (916) 780-4646.

Thanks
 
Posted by JohnB (Member # 969) on :
 
Count me in. I'll bring one, if not two cars.
 
Posted by 50 Deep (Member # 6216) on :
 
hey man i will definitely be there. Im either going to bring out my86 t-top or my 96 cobra so mark me down. Is there any way i can get a time slot? can you pm me the address and such. thanks
 
Posted by jordan_0806 (Member # 5888) on :
 
quote:
Originally posted by Throttle Stop:
Hey all

We are supposed to be having a dyno day with SacStangs.com, but there's something wrong with their website. We're not sure if they're still planning on doing it, so we're going to open it up to Ca Fords.

On Feb 25, for 3 pulls with A/F, HP, and Torque printout, $60.00. NO TUNING.

If anyone knows what's happening with SacStangs, like if they're still planning on this, or what's going on, please let us know. Also, if you want to get in on this dyno day, post up here and we'll get you taken care of. Or, you can call us at: The Throttle Stop, 1200 Plumber Way, Roseville, Ca. (916) 780-4646.

Thanks
we're still planning on going to the dyno day...we have a good group signed up so far...

here is the temporary URL for the site

http://63.247.78.250/~sacstang/forum/
 
Posted by Throttle Stop (Member # 5515) on :
 
Thanks, Jordan. We wern't sure what happened and didn't know if the site had gone the way of the Do-Do bird or what. So, we'll be ready starting at 8:00, first come, first served, and we'll run till we get them all done.
 
Posted by cummins (Member # 5931) on :
 
What type of dyno and how much hp can it handle? I'd hate to go all the way up there from Fremont only to find that I'd max out the dyno and not get any numbers.
 
Posted by Throttle Stop (Member # 5515) on :
 
We have a Dynojet that can handle 1000 hp.
 
Posted by stangboi (Member # 6315) on :
 
can you guys dyno my f350 diesel? and whats on the printout?
 
Posted by Throttle Stop (Member # 5515) on :
 
Unfortunately, we don't have the adapter to do a diesel, no way to get rpm readings.

Our printout gives hp, torque, and A/F.
 
Posted by cummins (Member # 5931) on :
 
So how was the dyno day? What were the hp numbers and cars?
 
Posted by Throttle Stop (Member # 5515) on :
 
We had a great day. 22 cars, and the highest number went to Mike "Chini" with an 03 Cobra with a Whipple that put out 565hp. Can't remember what torque was.

We had a '72(?) Camaro with a big block, 8-71 blower, NOS, and 2 Demons that shreded his tires (slicks couldn't expand), but he was cool. He wanted to try again after he had replaced the tires, but I didn't want to take the chance.

A big thanks to everyone that came out, and we'll be doing this again, everyone seemed to have a great time.
 
Posted by cummins (Member # 5931) on :
 
Sounds like fun too bad you are about 3 hours away it was just a little too far to make the trip. 22 cars is a lot! I wish I could have made it I love dyno events. Did JohnB bring a few cars?
 
Posted by JohnB (Member # 969) on :
 
quote:
Originally posted by cummins:
Did JohnB bring a few cars?
No, I did not. My Mach clone is still in the shop, my Cobra was in the garage, and the L had a trailer hooked up to it with a boardmembers car on it, waiting to be picked up. It was a busy weekend for me. [Frown]
 
Posted by cummins (Member # 5931) on :
 
awwww man. I wanted to see how much hp your cobra makes. With traps of 139 you must be around 700?
 
Posted by JohnB (Member # 969) on :
 
715hp/744tq was the last pull I've done. 8-9psi and a 35hp nitrous shot.
 
Posted by cummins (Member # 5931) on :
 
Hey looks like I'm a good guesser. Nice numbers over 700s for both is damn good very impressive!
 
Posted by RixSikCobra (Member # 5058) on :
 
quote:
Originally posted by JohnB:
715hp/744tq was the last pull I've done. 8-9psi and a 35hp nitrous shot.
[Eek!] off the hook. [patriot]
 
Posted by Hyperider (Member # 5936) on :
 
quote:
Originally posted by JohnB:
715hp/744tq was the last pull I've done. 8-9psi and a 35hp nitrous shot.
Bad ass numbers! Makes my 401hp sounds weak. [patriot]
 
Posted by on :
 

 




Fueled by Ford Mustang Owners
on CaliforniaFords.com