|
Author
|
Topic: FULL FUNCTION Dyno day & BBQ
|
TRIXSNK
¯
Member # 2844
|
posted
 
 
For those of you that may be interested my buddy's shop will have a dyno day and BBQ and is open to all types of serious peformance cars.
Fair warning as the shop commonly works on imported vehicles but we would like to see a turnout from all types of vehicles as these types of vehicles are what you would expect to see on the streets.
No rice is allowed just high performance oriented vehicles please.
PLEASE READ THE INFO IN THE LINK BELOW:
http://www.fftec.com/articles.php?article_id=11
Full Function Meet and Dyno Day Coming at you August 27th 2005.
Full Function will be holding its first annual summer meet and dyno day.
Going down August 27th is Full Functions first annual Dyno day and Tech meet. Come out bring your friends and your rides. Come check Full Functions facility, dyno and show room. Full Function will also be displaying our exclusive line up of customer and shop cars. Free tech support from a knowledgeable staff all day.
Dyno day: Full Function will be slashing prices on all dyno session during the meet.
40.00 For 3 pulls. First come first serve basis.
Special prize for highest dyno of the day. Highest dyno of the day will receive 3 free dyno sessions within a 1 year period.
We will be also holding a raffle. 5 dollars per ticket. Winner of the raffle gets a free Dyno session (3 pulls) (1-10 Ratio)
Food and BBQ: cooking starts at noon, first come first serve, youre welcome to bring your own meat and food or booze.
Please leave your bad attitudes at home. Please no burn outs, driftin,dounts or otherwise lude conduct. We dont want the Union City Police to come out and bust up our party.. We want our meet to be about cars, power and fun. Please come out and see us on August 27th
We will be adding events and more to the itinerary, check back for more updates.
![[patriot]](graemlins/patriot.gif)
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
stangless
¯
Member # 1414
|
posted
Sorry patrick, for some reason i honestly believed that the 27th was a sunday. i had been telling most of my friends that it was on sunday.. i don't know if my car will be ready by saturday.
i know a few of them work on saturday so we'll do our best to make it.
good luck
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
GTChink
¯
Member # 293
|
posted
Man I would be going if my car didn't run lean ![[Mad]](mad.gif)
--------------------
1999 GT Twin Screwedsold.
Posts: 477 | From: Bay Area, CA | Registered: Jun 2001
| :
|
|
04DropTopGT
¯
Member # 5934
|
posted
i would LOVE to go to this, where is it going to be held at? PM me or post the info? please...
is it this sat the 27th???
union city? what part of the bay area is that?
what time are they opening the shop up????
Posts: 30 | From: Sacramento | Registered: Aug 2005
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
04 Drop - Pm's ya bro ![[Wink]](wink.gif)
Jersey - I'm really sorry if i confused you but we'd love to see you guys at the shop even if your car isn't ready to just hang out and see what else shows car wise ![[Cool]](cool.gif) Just keep spinning them wrenches til then ![[Razz]](tongue.gif)
To also clear some things up......... the dyno session(s) will be first come first serve with a sign-up sheet to be signed the morning of the BBQ. (So be there early to ensure a spot as they will probably only be able to accomodate 15-20 cars that day)
They expect to have various forms of RWD/FWD/AWD cars so i beleieve they will run a session of each and then rotate to allow set-up of the dyno and so that people don't get bored with 1 particular type of vehicle.
Also for people like Jersey that may not have the cars done i can arrange another "planned" dyno day for memebers here after this Saturday's BBQ.
Thanks all! HOPE TO SEE SOME OF YOU THERE!
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
im down
--------------------
2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
stangless
¯
Member # 1414
|
posted
well.. it's official. car won't be ready by sat.
i'll be there regardless. i'm gonna try to convince carlos to see if he want's to cruise. or i might bring my friend 5.0 since he's working. we'll see.
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
|
|
TRIXSNK
¯
Member # 2844
|
posted
Evan, Jersey, and Lilghoust (Neeraj's brother ?)
![[Confused]](confused.gif)
See you guys there!
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
yohuallin
¯
Member # 4452
|
posted
Ill be there, i got a 5.0 now that the v6 is gone, altough i'd love to had dyno the v6 ![[Frown]](frown.gif)
Posts: 359 | From: sacramento | Registered: Apr 2004
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
quote:
Originally posted by SpdDevl:
I'll be there today in Rick's cobra.
Hey Patrick, lets put his car on the dyno today! Try and fit me in!!!
~Lauren
Any new numbers? Im excited to get Mine tuned and dynoed soon!
--------------------
Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
Thanks everyone that stopped by!
Sorry if i was not able to introduce myself to anyone
I wish we could have gotten Rick's and my Cobra up on the dyno but there were at least 30+ cars that wanted to dyno so i wanted to them to take care of the customers that traveled a distance since i'm at the shop almost daily lol.
I'm sure Rick's car would have won top HP #'s but i'm going to be working on getting an all Mustang day to dyno soon.
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
GTChink
¯
Member # 293
|
posted
any pics?
I couldn't make it since my stang was getting a tune...
--------------------
1999 GT Twin Screwedsold.
Posts: 477 | From: Bay Area, CA | Registered: Jun 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
I wasn't able to take any
But they did take some so i'll post a link ASAP.
How did your car end up after the tune?
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
GTChink
¯
Member # 293
|
posted
quote:
Originally posted by TRIXSNK:
I wasn't able to take any
But they did take some so i'll post a link ASAP.
How did your car end up after the tune?
not bad at all..
402rwhp and 395lbs-ft torque at 90degrees F!!!
we'll see what it'll do in the winter at like 60degrees.hehe
--------------------
1999 GT Twin Screwedsold.
Posts: 477 | From: Bay Area, CA | Registered: Jun 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by GTChink:
quote:
Originally posted by TRIXSNK:
I wasn't able to take any
But they did take some so i'll post a link ASAP.
How did your car end up after the tune?
not bad at all..
402rwhp and 395lbs-ft torque at 90degrees F!!!
we'll see what it'll do in the winter at like 60degrees.hehe
Nice #'s is that the I/C'd 9 psi kit?
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
I left early and couldnt make it back in time for my dyno but did snap a few photos...here goes..
--------------------
2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
urs patrick.
--------------------
2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
--------------------
2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
GTChink
¯
Member # 293
|
posted
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by GTChink:
quote:
Originally posted by TRIXSNK:
I wasn't able to take any
But they did take some so i'll post a link ASAP.
How did your car end up after the tune?
not bad at all..
402rwhp and 395lbs-ft torque at 90degrees F!!!
we'll see what it'll do in the winter at like 60degrees.hehe
Nice #'s is that the I/C'd 9 psi kit?
yep
--------------------
1999 GT Twin Screwedsold.
Posts: 477 | From: Bay Area, CA | Registered: Jun 2001
| :
|
|
TenthScale
¯
Member # 4632
|
posted
Damn Now I really wish I would have decided to drive up...Untill I saw the pics I did not realise I have been to that shop a bunch of times
Did you guys just buy the shop? I used to know the guy that owened it before and they did not have a dyno.. Joey moved to thailand about year or so ago?
Posts: 57 | From: Bay Area | Registered: Jun 2004
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote:
Originally posted by TenthScale:
Damn Now I really wish I would have decided to drive up...Untill I saw the pics I did not realise I have been to that shop a bunch of times
Did you guys just buy the shop? I used to know the guy that owened it before and they did not have a dyno.. Joey moved to thailand about year or so ago?
Don't know if it's the exact one you've been to but it's right across from what used to be Bozz auto.
My buddy Sean owns the shop and he had the AWD dyno put in.
Let me know if you're interested in dynoing so i can set something up.
--------------------
9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
TenthScale
¯
Member # 4632
|
posted
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by TenthScale:
Damn Now I really wish I would have decided to drive up...Untill I saw the pics I did not realise I have been to that shop a bunch of times
Did you guys just buy the shop? I used to know the guy that owened it before and they did not have a dyno.. Joey moved to thailand about year or so ago?
Don't know if it's the exact one you've been to but it's right across from what used to be Bozz auto.
My buddy Sean owns the shop and he had the AWD dyno put in.
Let me know if you're interested in dynoing so i can set something up.
99.9% sure its the same one My friend Joey owned it with his dad, He moved to Thailand and his dad moved to San Antonio. Used to hangout there Friday nights working on R/C cars always smelled like Brownies outside at night ![[Big Grin]](biggrin.gif)
Will let you know on the dyno, after I get back from a business trip I think I am finally going to order the pullies up and will either need a tune or if I go mail order at least a dyno check.
Posts: 57 | From: Bay Area | Registered: Jun 2004
| :
|
|
TenthScale
¯
Member # 4632
|
posted
quote:
Originally posted by TRIXSNK:
quote:
Originally posted by TenthScale:
Damn Now I really wish I would have decided to drive up...Untill I saw the pics I did not realise I have been to that shop a bunch of times
Did you guys just buy the shop? I used to know the guy that owened it before and they did not have a dyno.. Joey moved to thailand about year or so ago?
Don't know if it's the exact one you've been to but it's right across from what used to be Bozz auto.
My buddy Sean owns the shop and he had the AWD dyno put in.
Let me know if you're interested in dynoing so i can set something up.
99.9% sure its the same one My friend Joey owned it with his dad, He moved to Thailand and his dad moved to San Antonio. Used to hangout there Friday nights working on R/C cars always smelled like Brownies outside at night
Will let you know on the dyno, after I get back from a business trip I think I am finally going to order the pullies up and will either need a tune or if I go mail order at least a dyno check.
Posts: 57 | From: Bay Area | Registered: Jun 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
