This is topic Pinks testing 8-3 @ Sears Point in forum Drag Racing at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001645
Posted by Tinner (Member # 2688) on
:
Anyone going out to get one last test session in before Pinks? I'll be out there dialing in the new rear suspension.
Posted by 1SLOWLX (Member # 558) on
:
I might be out there trying to get a buddy to help me that day well see
Posted by HYFLOHDS (Member # 4198) on
:
slowlx i'll be there hit me up. testing my new datalogger,
Posted by need-a-cage (Member # 5415) on
:
I'll be there.
Posted by 8stang8 (Member # 8082) on
:
+1 in the stands.
Tomorrow is going to be packed though guys.
Posted by 93PONY (Member # 60) on
:
Friday is also TNT at Infineon.
We'll be out there dialing in the rest of the setups on Friday.
Posted by Tinner (Member # 2688) on
:
quote:
Originally posted by 93PONY:
Friday is also TNT at Infineon.
We'll be out there dialing in the rest of the setups on Friday.
I'll see you Guys out there Friday , I'm just going out tomorrow to make sure it launches strait.
Posted by 93PONY (Member # 60) on
:
quote:
Originally posted by Tinner:
quote:
Originally posted by 93PONY:
Friday is also TNT at Infineon.
We'll be out there dialing in the rest of the setups on Friday.
I'll see you Guys out there Friday , I'm just going out tomorrow to make sure it launches strait.
Straight....LOL It better run straight! We ain't race'n on a 1/4 oval!
JK
What suspenssion setup did you end up going with?
Posted by Tinner (Member # 2688) on
:
quote:
Originally posted by 93PONY:
quote:
Originally posted by Tinner:
quote:
Originally posted by 93PONY:
Friday is also TNT at Infineon.
We'll be out there dialing in the rest of the setups on Friday.
I'll see you Guys out there Friday , I'm just going out tomorrow to make sure it launches strait.
Straight....LOL It better run straight! We ain't race'n on a 1/4 oval!
JK
What suspenssion setup did you end up going with?
Team Z
I just left a message w/ Drew to remind you guys to bring some AED decals for my windows. ![[patriot]](graemlins/patriot.gif)
Posted by KevinL (Member # 2428) on
:
I'll be there with the 8 sec stang. It's got a 337 SBF with a D2 procharger (12 rib belt), weighs 3030lbs with me in it. Come over to the comp rod lanes and check it out. Teal blue back-halved 90 Mustang.
Kevin Locke
[ September 02, 2008, 07:21 PM: Message edited by: KevinL ]
Posted by WickedStang (Member # 7692) on
:
quote:
Originally posted by KevinL:
I'll be there with the 8 sec stang. It's got a 337 SBF with a D2 procharger (12 rib belt), weighs 3030lbs with me in it. Come over to the comp rod lanes and check it out. Teal blue back-halved 90 Mustang.
Kevin Locke
Sounds like a good set up! Any pics?
Posted by Tinner (Member # 2688) on
:
quote:
Originally posted by KevinL:
I'll be there with the 8 sec stang. It's got a 337 SBF with a D2 procharger (12 rib belt), weighs 3030lbs with me in it. Come over to the comp rod lanes and check it out. Teal blue back-halved 90 Mustang.
Kevin Locke
Will do , I think I've seen your car run before it's a bad ass ride.
Posted by 1SLOWLX (Member # 558) on
:
I should be there going to give a couple easy passes on the motor breaking myself in. Nitrous runs on friday for me depending on how fast I go ![[Smile]](smile.gif)
Posted by warhorse58gt (Member # 7702) on
:
no et limits on wednesday? and what about mufflers? i want to get one more test in but don't have mufflers on the car.
Posted by KevinL (Member # 2428) on
:
That's right, no ET limits at Infineon but you do need to run some sort of muffler to make the 115db noise limit. They measure noise in the burn-out area.
Posted by need-a-cage (Member # 5415) on
:
I'll see you there Kevin. My race weight is 600lbs more than yours! I am trying to get an 11.60 setup dialed in with sticky tires but it is going to be hot again. I slowed it down last week with extra fuel and lower timing to run the ET Streets and stay over 11.50, but it was so damn hot it was in the 11.70's. Also, the ET Streets were brand new and were not hooking like they should.
Warhorse58gt, you can't go under 11.50 in the street class and you have to run mufflers. If you want to go under 11.50, you just have to run in Comp Rod with Kevin's 8 second ride.
Craig
Posted by 1SLOWLX (Member # 558) on
:
I'm in kevins class LOL oh well we shall see how fast my little motor can go. Mainly going to see if my car will tech
Posted by need-a-cage (Member # 5415) on
:
I broke an axle in the 3rd round of eliminations!! This new clutch definitely works better than my Centerforce. This is what I was afraid of. Now I don't have time to upgrade. I just have to find another stock axle to throw in for this weekend!
Posted by FoX GT (Member # 4587) on
:
quote:
Originally posted by WickedStang:
quote:
Originally posted by KevinL:
I'll be there with the 8 sec stang. It's got a 337 SBF with a D2 procharger (12 rib belt), weighs 3030lbs with me in it. Come over to the comp rod lanes and check it out. Teal blue back-halved 90 Mustang.
Kevin Locke
Sounds like a good set up! Any pics?
[ September 04, 2008, 10:09 AM: Message edited by: FoX GT ]
Posted by need-a-cage (Member # 5415) on
:
Mine would have looked just like that if I didn't break the axle. LOL!!
Before that I did get the times where I wanted them. I ran 11.58, 11.59, 11.66, and 11.61. Then bang!!
Posted by 1SLOWLX (Member # 558) on
:
I was there pussy footing my motor first pass 12.0 at 107 second pass still being a pussy 11.7 at 114 last pass pulled a 1.67 60ft leaving the brake all under 3k also felt a lot better fuel pressure was going wacky in the heat but my hood almost flew off so I loaded and left its got more in it then time to play with the fogger
Fueled by Ford Mustang Owners
on CaliforniaFords.com