Who's rollin out to Sac TNT? - Northern California Ford Owners

This is topic Who's rollin out to Sac TNT? in forum Drag Racing at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=001588

Posted by TRIXSNK (Member # 2844) on :

Anyone going?

Thinking about headin up as i got the clutch situation fixed and re-tuned the car last night.

Upped the boost to 34 psi and made 50 whp more.

Should be up around 640ish on a dynojet [Eek!]

If not for sure we'll be out w/ 3 cars next Fri [dance]

Posted by Yellow94GT (Member # 431) on :

I'll be out there watching. Still don't have a roll bar in the car yet, and they were very angry with me last time I ran the car....lol

Posted by 66 AC COBRA (Member # 904) on :

quote:
Originally posted by Yellow94GT:
I'll be out there watching. Still don't have a roll bar in the car yet, and they were very angry with me last time I ran the car....lol

they shouldn't give you too much shit I was about 15 infractions away from being legal [Razz]

Posted by Yellow94GT (Member # 431) on :

quote:
Originally posted by 66 AC COBRA:

quote:
Originally posted by Yellow94GT:
I'll be out there watching. Still don't have a roll bar in the car yet, and they were very angry with me last time I ran the car....lol
they shouldn't give you too much shit I was about 15 infractions away from being legal

Haha! I have extended wheel studs and a DS safety loop! [Big Grin]

Posted by 66 AC COBRA (Member # 904) on :

let see I was missing

chassi cert
comp lic
out of date belts
no gloves, pants, shoes, neck brace
no flexplate/planetary shield
no nitrous blow down tube
no chute

so only 11 [Big Grin]

all is ready to go now minus my comp lic [Frown]

Posted by TRIXSNK (Member # 2844) on :

Damn Drew you've been there soo many times i figured they knew you so well they just didn't care [Razz]

Add me to the list for safety equip needed over winter.....hint....hint....SANTA [Big Grin]

Posted by Yellow94GT (Member # 431) on :

quote:
Originally posted by TRIXSNK:
Damn Drew you've been there soo many times i figured they knew you so well they just didn't care

Add me to the list for safety equip needed over winter.....hint....hint....SANTA

It was like that for a LONG time. I guess they just got fid up.

Really though, it is just way to easy to build a 10 second car now days. [Roll Eyes]

Posted by season'd 88 (Member # 169) on :

[ October 06, 2007, 03:52 AM: Message edited by: season'd 88 ]

Posted by cummins (Member # 5931) on :

Hey Pat it was cool to finally meet you last week at cmi. Did anyone go to the tnt tonight?

Posted by TRIXSNK (Member # 2844) on :

quote:
Originally posted by cummins:
Hey Pat it was cool to finally meet you last week at cmi. Did anyone go to the tnt tonight?

U too man.

Nope decided to hold off until this Fri.

Re-tuned it for a bit more power.

Now just need a TNT or 2 to get used to bangin off shifts so quick in sequence.

Posted by need-a-cage (Member # 5415) on :

I ran one 11.45 at Infineon last Wednesday and the official came out to talk to me.

I want to up the boost from 7psi with my 3.6" pulley to 10psi with my 3.33" pulley when I get my 60lb injectors installed and go for a 10 sec pass. Should I do it at Sac? How pissed do they get when you run under 11.50 with no cage? How may sub 11.50's would I get before I get thrown out? Should I do it during a test and tune or a grudge night?

I know I got a lot of sub 12.00 runs with no hassle when the cage rule was 12.00. However, that was a long time ago and I heard that they are cracking down.

Thanks

Posted by cummins (Member # 5931) on :

quote:
Originally posted by TRIXSNK:

quote:
Originally posted by cummins:
Hey Pat it was cool to finally meet you last week at cmi. Did anyone go to the tnt tonight?
U too man.

Nope decided to hold off until this Fri.

Re-tuned it for a bit more power.

Now just need a TNT or 2 to get used to bangin off shifts so quick in sequence.

That's cool. So now that you met me I'm more handsome in person than in the pics don't ya think???

Posted by TRIXSNK (Member # 2844) on :

quote:
Originally posted by cummins:

quote:
Originally posted by TRIXSNK:

quote:
Originally posted by cummins:
Hey Pat it was cool to finally meet you last week at cmi. Did anyone go to the tnt tonight?
U too man.

Nope decided to hold off until this Fri.

Re-tuned it for a bit more power.

Now just need a TNT or 2 to get used to bangin off shifts so quick in sequence.
That's cool. So now that you met me I'm more handsome in person than in the pics don't ya think???

Now that's a questionable statement lol [Razz]

jus playin!

By the way i met your buddy Jeff w/ the blue Supra.

Nice guy and looks like he's on track with getting the car to ET better.

He needs a bigger turbo [Big Grin]

Need-a-cage - I would do it up at sac. They tend to be a bit less strict than Infineon but it seems like they are cracking down as there are more and more sub 11.50 cars prowling the streets now-a-days [Roll Eyes]

Just don't do it at a big event and you should be fine for a little while.

On that note we should have a few cars getting warnings this Fri at TNT so come on up and get booted out [Whoo Whooooo!]

Posted by need-a-cage (Member # 5415) on :

It will probably be a couple months away. I ran it once with my 3.33" pulley on it and my Nittos and it ran 123.7mph in hot weather, but it was running too lean. I am running 30lb injectors with an 8:1 FMU. I have 60lb injectors waiting to go in, but I need a way of tuning it. I was going to get a Tweecer, which has a long learning curve, but I have been reading about guys having hardware problems with them and that makes me nervous. The PMS is just out of my budget right now, so I don't know what I am going to do. Anyway, I am sure it will break 125mph with a good tune and the 3.33" pulley in colder weather. A good 60ft should hit the 10's with 125mph. However, my clutch is slipping when my 60ft gets to the low 1.6's.

Fueled by Ford Mustang Owners
on CaliforniaFords.com