T O P I C R E V I E W
|
TRIXSNK
Member # 2844
|
posted
I'll be out there once again going for that 10 sec slip [ November 16, 2006, 07:51 PM: Message edited by: TRIXSNK ]
|
SmokinLX
Member # 1684
|
posted
You mean december 11th?
|
TRIXSNK
Member # 2844
|
posted
quote: Originally posted by SmokinLX: You mean december 11th?
I'm trippin Mark.....long ass day of inspecting womens private parts will do that to a man
Think you'll have the rocker problem fixed?
|
SmokinLX
Member # 1684
|
posted
YEAH I will definatley be ready. Sound's like fun as long as the wheather hold's out.
|
TRIXSNK
Member # 2844
|
posted
Got some new rubber so i'm all set!
Just need to fill'er up with a little VP 100
|
RED89GT
Member # 7212
|
posted
How did it go?
|
Daniel50
Member # 5629
|
posted
it was the day of the turbo silverado's and nsx's.
|
Lilghoust
Member # 20
|
posted
I got to run a eaton charged silverado. I beat his 12.7 to my 12.5 right before I left. It wasnt a good outing for me. I was wheel hopping all over the place and missed 3rd on my best 60 ft run. Plus the printing machine stopped working so I couldn't get all of my timeslips.
|
TRIXSNK
Member # 2844
|
posted
quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
|
Daniel50
Member # 5629
|
posted
quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure
|
TRIXSNK
Member # 2844
|
posted
quote: Originally posted by Daniel50: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure
Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.
Plenty of others going deep into the 10's with the IRS.
I really hope i just knocked off a wheel wieght and not much more......
|
SmokinLX
Member # 1684
|
posted
quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure
Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.
Plenty of others going deep into the 10's with the IRS.
I really hope i just knocked off a wheel wieght and not much more......
By the look's of Your trap speed You are making some good power! Any new's on the rear end? I am thinking about going on saturday december 2nd if everything goes as planned.
|
TRIXSNK
Member # 2844
|
posted
quote: Originally posted by SmokinLX: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure
Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.
Plenty of others going deep into the 10's with the IRS.
I really hope i just knocked off a wheel wieght and not much more......
By the look's of Your trap speed You are making some good power! Any new's on the rear end? I am thinking about going on saturday december 2nd if everything goes as planned.
Mark
Hey bud i was lookin for ya all day lol.
Did the rocker prob keep you from making it out?
No word yet on the rear as i haven't even gotten back into the car since the outting at the track.
On the 128 mph pass everything went well it just hooked so well that it bogged down the motor a bit more than i'd like with a 4200 rpm launch......i'm just too pussy to launch the thing near 5000
Hope to be able to make it out with ya then but i'm also praying for rain so we can get this SNOWBOARDING SEASON started
|
SmokinLX
Member # 1684
|
posted
quote: Originally posted by TRIXSNK: quote: Originally posted by SmokinLX: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: quote: Originally posted by TRIXSNK: quote: Originally posted by Daniel50: it was the day of the turbo silverado's and nsx's.
You can say that again
My car went 11.42 at the highest mph yet 128
Couldn't get the car off the line as well as before but still went 1.64 60ft on that pass.
Bad news is after the last attempted pass it got into some hop a now has a funky vibe in the rear.
Need to see where it's coming from
maybe its time for a sold axle? i bet its those et streets radials that are causing the problem. ill be happy to take those off your hands so you dont have anymore problems in the future.. i got a new best 13.2 out there. next time ill be on drag radials for sure
Naaaa......no solid is going in this Terminator unless it becomes a strictly drag race car.
Plenty of others going deep into the 10's with the IRS.
I really hope i just knocked off a wheel wieght and not much more......
By the look's of Your trap speed You are making some good power! Any new's on the rear end? I am thinking about going on saturday december 2nd if everything goes as planned.
Mark
Hey bud i was lookin for ya all day lol.
Did the rocker prob keep you from making it out?
No word yet on the rear as i haven't even gotten back into the car since the outting at the track.
On the 128 mph pass everything went well it just hooked so well that it bogged down the motor a bit more than i'd like with a 4200 rpm launch......i'm just too pussy to launch the thing near 5000
Hope to be able to make it out with ya then but i'm also praying for rain so we can get this SNOWBOARDING SEASON started
Yeah I am waiting for rocker stud's to be delivered. I got a new push rod "Thank's Bill" so I am set as soon as the new stud's arrive. You should do the level 5 axel's & whatever else u IRS guy's need to do so You can launch where You need to. Do You know what RPM You are crossing the line at? I am rite on the rev limiter "6500" now with Mine so I might try to stuff some 28 inch tall tires on next time.
|
TRIXSNK
Member # 2844
|
posted
What gear are you running out back?
I don't remember the exact rpm but i've got a bit more before redline that's for sure but watching the speedo go past 130 was nice to feel ...... it's just slowing down that becoming a little tough
I'm one of those guys that won't put level 5's until i break a stock shaft
Plus there are plenty of guys going deep in the 1.5's and lower on the IRS and some still with stock shafts.
IRS for life lol
|
SmokinLX
Member # 1684
|
posted
quote: Originally posted by TRIXSNK: What gear are you running out back?
I don't remember the exact rpm but i've got a bit more before redline that's for sure but watching the speedo go past 130 was nice to feel ...... it's just slowing down that becoming a little tough
I'm one of those guys that won't put level 5's until i break a stock shaft
Plus there are plenty of guys going deep in the 1.5's and lower on the IRS and some still with stock shafts.
IRS for life lol
I have 373's in mine. Well if You are waiting to break something then try a 5000 rpm launch . I put My foot to the floor with the tranny brake on and launched at over 5000 rpm at the track last time & the car left real hard but with the wheelspin I did'nt gain anything compared to My normal launch. Seem's like I am stuck at 1.60 60 foot's with My ET Street's for now.
|
cummins
Member # 5931
|
posted
Don't give up on IRS yet! I'm on completely stock irs suspension with stock everything and I've cut high 1.3's a few times and I average around 1.42! All stock completely unmodified from the factory!
|
98slowhoe 'FIFTYLX'
Member # 895
|
posted
quote: Originally posted by cummins: Don't give up on IRS yet! I'm on completely stock irs suspension with stock everything and I've cut high 1.3's a few times and I average around 1.42! All stock completely unmodified from the factory!
Any Vids?
|