|
Author
|
Topic: NEw to the fox world but went to the track already...
|
90lxfoxbody
¯
Member # 6947
|
posted
 
 
Well anyway i just got my 90 fox about 4 weeks ago.Clean little lx 161000 miles full power a/c leather the works aod car.
Mods 5 lug swap and 4.10s
mass air 24lbs injectors
bbk shortys and x pipe
125 shot
12.69 at 110 on 295 50 15 winston winner street tires.
1.93 60ft at famosa.
The car had the shortys and the air filter i did gears 5 lug swap and mass and bottle.
Going to put converter and drag radials and try for 11s on a 100% stock motor,still spinning the a/c and smog pump. web page
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
Just slap a 150 Shoot on it with the DR's and you should be there. 110 With the 125 won't do it, but I do understand the winstons don't help. Looks like you are doing pretty well with your Fox. Keep up the good work!
--------------------
AKA Franky Freaking 5 liter
Advanced Engine Development
SCT dealer
Dynotuning
Engine building
916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
![[worship]](graemlins/worship.gif) N20
Sounds like you are on good pace to keep knocking those ET's down! What kind of DR's are you planning to go with? How big of a stall?
There is another guy on this site, Jackpine 5.0, that is trying to get his stock motor Fox into the 12's with just suspension and tire mods. ![[Big Grin]](biggrin.gif)
Keep us posted on your progress. Maybe come up and race in Sac sometime?
Drew ![[patriot]](graemlins/patriot.gif)
--------------------
AED
1994 GT Bucket that will likely never run
1999 SLOLEEN Twin Turbo Coyote
2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
BOTTLED.LX
¯
Member # 3267
|
posted
damn sounds good i would recomend some mickey thompson drag radials, lower control arms, drag springs in front ![[Razz]](tongue.gif) and a 150 shot
--------------------
SOUTHBAYSTANGS
95 STANG GTS AFR'D,CAM'D,INTAKE ON JACK STANDS
99 RANGE ROVER 22'S SPINNERS
64 IMPALA W/WET KANDY PAINT
80 CADILLAC COUPE DEVILLE
Posts: 1281 | From: E. SAN JOSE.CA | Registered: Sep 2003
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
Im going to box the control arms do bushings front drag springs mickey drag radial.something in the 27 to 28 tall and 10 wide.The converter is a 3200 stall.Im not going to up the shot till i do the intake and put the under intake plate on it.I may put maximum motorsports lowers but for now just beef up the stock ones....Im hoping with converter and drag radials i will be able to pull a low 1.70 high 1.60s on the unit for the 60ft.
Also i posted a link to the pic of the car....Not bad for 1800 bucks.
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
quote:
Originally posted by 90lxfoxbody:
Im going to box the control arms do bushings front drag springs mickey drag radial.something in the 27 to 28 tall and 10 wide.The converter is a 3200 stall.Im not going to up the shot till i do the intake and put the under intake plate on it.I may put maximum motorsports lowers but for now just beef up the stock ones....Im hoping with converter and drag radials i will be able to pull a low 1.70 high 1.60s on the unit for the 60ft.
Also i posted a link to the pic of the car....Not bad for 1800 bucks.
I will reccomend www.edgeracingconverters.com for Your converter need's. Have You changed the stock valvespring's out yet? If not You should consider doing that also. Nice time's!
--------------------
Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
90lxfoxbody
¯
Member # 6947
|
posted
I have heads and cam and intake already with all new valve train so im just playing to see how fast i can make the stock shit.I have a persecion converter already.Im going to freashen the trans with a nice sift kit and converter,then after that im going to do the motor shit....I just want to do it in stages to see the improvments i make along the way.
--------------------
Owner Of All Out Performance
Ya I own that Cobra
Old setup whipple and jug 9.37 155
New twins hoping for 8.50s at 165
Posts: 588 | From: fresno ca | Registered: Jul 2006
| :
|
|
HaulinAss Motorsports
Its a STREETRaceCar!
Member # 541
|
posted
Whats up Nate,I see your enjoying that stang ![[Whoo Whooooo!]](graemlins/woowoo.gif)
Posts: 22494 | From: Sacramento | Registered: Nov 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
