T O P I C R E V I E W
|
99FLYER
Member # 1528
|
posted
This is the secon time I am typing all this! Damn computer!
I want to get a cold air intake for next week to see if that is what is holding me back. E.T. MPH 60ft Time 14.15@99.8 2.26 5:08 13.99@99.3 2.17 5:43 13.90@99.5 2.12 6:57 13.86@99.5 2.08 7:48 13.94@98.5 2.09 no headlight or filter 8:24 13.84@99.3 2.03 8:48 13.97@99.3 2.09 8:54 14.09@98.4 2.15 9:10 13.98@98.9 2.09 9:13
I could have gotten more runs in but the car was hot and I had no gas! [ November 07, 2002, 10:55 AM: Message edited by: 99FLYER ]
|
281n/a
Member # 1465
|
posted
damn your almost up to my time what are your mods?
|
99FLYER
Member # 1528
|
posted
Mild port/polish heads, Mod max oversize valvetrain, frrp headers o/r h-pipe, pullys, 3:73 gears. I do have a check eng light on tho, not from the exhaust. I am not impressed because I ran a 13.94@98.5 when I was bone stock, I do have 75,000 miles now. A lot of work for one tenth! [ November 07, 2002, 02:27 PM: Message edited by: 99FLYER ]
|
281n/a
Member # 1465
|
posted
yeah somethings not right i hit a 13.71 101.1 with the mods in my signature 2000 gt auto stock tires my advice get a stall converter and watch the times drop i hope t obe low 13's when i install mine
|
TRY2PAZ
Member # 97
|
posted
Do a compression check. Your light weight saleen kit is not helping either. Do you ahve a shift kit?
|
bunchmyfunky
Member # 360
|
posted
Go to autozone and have them check what codes your throwing. Time for some ET streets and then your looking at 13.5 or better. Did you upgrade the fuel system when you did the headwork and get a custom tune?
|
99FLYER
Member # 1528
|
posted
quote: Originally posted by TRY2PAZ: Do a compression check. Your light weight saleen kit is not helping either. Do you ahve a shift kit?
I am going to do a compression check tonight just to see if there were any mistakes putting it back together. yeah the car is heavy...wheels are 35lbs each without tires! I think weight w/ driver is 3,630
|
99FLYER
Member # 1528
|
posted
quote: Originally posted by bunchmyfunky: Go to autozone and have them check what codes your throwing. Time for some ET streets and then your looking at 13.5 or better. Did you upgrade the fuel system when you did the headwork and get a custom tune?
No tuning has been done yet, not even for the 3:73's fuel sys is stock and so is intake. I am ordering a dense charger and am looking into a TB any suggestions on mm? I went to auto Zone yesterday and the state made them stop that service. too many shops complaining that they could not rip any one off any more! I get a 2.0 60 ft which aint too shabby for 18's all around w/ 285's I am going to look into some e/t streets for my stock 16's
|
bunchmyfunky
Member # 360
|
posted
I have a FMS 70mm TB. Which seem's to work well with my setup. Your 60fts are good for Street tires. All I can say is ET Streets If you want to see those times drop.
|
Yellow94GT
Member # 431
|
posted
Good times Carlo. There is lots more in it
|
y2kgt01
Member # 1257
|
posted
check ur egr, i have heard that they go bad on 99 up mustangs a lot.
|
yesIdid
Member # 58
|
posted
quote: Originally posted by bunchmyfunky: All I can say is ET Streets If you want to see those times drop.
YUP!!!!!
|
99FLYER
Member # 1528
|
posted
I ordered a densecharger and I will try to get rid of the CE light so we'll see what happens next WED.
|
FireChickenLS1
Member # 781
|
posted
nice times
|
FasterDamnit
Member # 442
|
posted
How would those times relate to a 5 speed w/ same mods? I suppose it is still the stock converter. If so, the ET streets won't make a huge difference if you can't raise your launch rpm. JL
|