T O P I C R E V I E W
|
TRY2PAZ
Member # 97
|
posted
Just wondering if anyone has broke my record yet? I know some one has to of hit the 12's buy now. 13.31@102
|
1sicgt
Member # 714
|
posted
quote: Originally posted by bunchmyfunky: Check out the MPH 60fts and ET's These times are all on the Nitto's Again Congrats to Drew for out driving me again. Since the last time I was at Sac we added the intake spacer and Lakewood LCA's. First I worked on launching the car and after I got that down somewhat, then I worked on my shifting and when I did that you can see my MPH jump at the I3 and 1320. Runs are from worst to best you can see which ones I missed gears on. BTW I got 16 runs in.
60ft I3mph ET MPH 1.88 70.63 14.64 91.77 1.82 76.79 14.51 76.99 2.13 80.00 13.77 101.83 2.03 80.34 13.61 102.25 2.06 80.81 13.61 102.31 2.00 80.36 13.59 102.75 1.89 80.17 13.48 102.03 1.86 80.19 13.47 102.19 1.87 80.51 13.42 102.20 1.96 81.90 13.41 103.75 1.82 80.45 13.40 102.26 1.89 81.35 13.35 103.32 1.79 80.80 13.27 102.56 1.85 81.89 13.23 103.51 1.87 82.21 13.20 103.74 1.85 82.45 13.15 103.86 (Drew's run)
|
StoplightWarrior
Member # 211
|
posted
Bunchmyfunky's GT is very low 13's!
|
sic91sleeper
Member # 779
|
posted
Thomas is knocking on your door Brian....
|
bunchmyfunky
Member # 360
|
posted
See sig. Hopefully we will be in the 12's at LACR. I got new plugs and the 180 degree thermostat going in next weekend plus I will be doing the resistor mod when we run. Also we are going to takeout the Sportline springs in the rear,put the stock springs back in and run ET Streets.(Mike if that works I will be calling you about buying your tires)And hopefully soon I will be putting the Hooker LTs and O/R X on.
|
StoplightWarrior
Member # 211
|
posted
Hey, how did you like that intake spacer?
|
Yellow94GT
Member # 431
|
posted
quote: Originally posted by TRY2PAZ: Just wondering if anyone has broke my record yet? I know some one has to of hit the 12's buy now. 13.31@102
What's going on Brian? How is the new house?
Looks like your going to have to come out to the track and defend your title. I broke your record too....lol
(in Mark's Car) [ September 08, 2002, 03:31 PM: Message edited by: Yellow94GT ]
|
TRY2PAZ
Member # 97
|
posted
quote: Originally posted by Yellow94GT: quote: Originally posted by TRY2PAZ: Just wondering if anyone has broke my record yet? I know some one has to of hit the 12's buy now. 13.31@102
What's going on Brian? How is the new house?
Looks like your going to have to come out to the track and defend your title. I broke your record too....lol
(in Mark's Car)
Sweet, I wil be at the track when it cools a little more, also waiting for wikd281 to get a 6 point cage. When I go back I will be in the low 12's
|
bunchmyfunky
Member # 360
|
posted
Hey Brian,
What are you going to do to get into the low 12s. I was going to do heads and cams after I do the LTs. But I think im going to do a little boost just the Saleen series II supercharger. After that I will more then likly start building a full on race motor. Let me know if your in SJ at all this week. Maybe we can all get together for lunch again.
|
Yellow94GT
Member # 431
|
posted
LOW 12's!?!?!?!
|
TRY2PAZ
Member # 97
|
posted
quote: Originally posted by bunchmyfunky: Hey Brian,
What are you going to do to get into the low 12s. I was going to do heads and cams after I do the LTs. But I think im going to do a little boost just the Saleen series II supercharger. After that I will more then likly start building a full on race motor. Let me know if your in SJ at all this week. Maybe we can all get together for lunch again.
Just going to add some laughing gas. I'm leaving for a house boat trip in a few hours.Will be gone for a week. MAybe we can go to tlunch the following week?
|
bunchmyfunky
Member # 360
|
posted
Brian sounds good. PM me when you get back.
|
281n/a
Member # 1465
|
posted
the fastest n/a 2 valve is john edwards he 's on stangnet he has a cobra block ported heads,cams,frpp intake,pro m 77 maf,march pullies,think 4400 stall converter,rear seat delete kit, his best is 12.2 110
|
bunchmyfunky
Member # 360
|
posted
Eric, were talking about the site and around here. I know my car is not even close to some of the guys on stangnet.
|
Bullitt208
Member # 441
|
posted
What's impressive about Mark's numbers are that they are in full street trim. He doesn't even remove the spare and jack!
|
Yellow94GT
Member # 431
|
posted
Does a 100 pound lighter driver still make it street trim?...lol [ September 10, 2002, 04:00 PM: Message edited by: Yellow94GT ]
|
Spellbound
Member # 1553
|
posted
quote: Originally posted by bunchmyfunky: Hopefully we will be in the 12's at LACR.
You will actually be slower at LACR, maybe up to a .5 sec slower, unless you bring your own atomosphere, due to the higher elevation.
|
yesIdid
Member # 58
|
posted
Sup Mark?
I installed the spacer and the car pulls harder in the powerband.
I wonder if a t/body would help at this point .
The ETs are here if u still want em
|
bunchmyfunky
Member # 360
|
posted
Were gonna put the stock springs back in and see how it works with Drew's ET Streets. If all goes well I'll be calling you up.
|
Kevin99GT
Member # 272
|
posted
You talkin' about just this board?
There's a guy or two who post on MW rarely and Corral pretty often who run mid-high 12s. Longtubes, no cats, wide open exhaust, steep gears, massive weight reduction and, otherwise, a lotta rowin' skillz.
|
TRY2PAZ
Member # 97
|
posted
quote: Originally posted by Kevin99GT: You talkin' about just this board?
There's a guy or two who post on MW rarely and Corral pretty often who run mid-high 12s. Longtubes, no cats, wide open exhaust, steep gears, massive weight reduction and, otherwise, a lotta rowin' skillz.
Talking bay area Kevin. You coming to our meet on the 28th?
|