T O P I C R E V I E W
|
FasterDamnit
Member # 442
|
posted
Well, Last day of the week and Amtrak is finally close enough to being on time that I can go and buy some used American Racer G60's. They aren't as soft a sidewall as my previous non-DOT set, but they have a LOT of tread left. I was told that after one nights use they get pulled. How does $20 each, sound? Hopefuly I can see some low 1.7's...
How are you doing, Joe, Gonna Make it?
JL [ January 17, 2003, 07:59 PM: Message edited by: FasterDamnit ]
|
shade-tree
Member # 298
|
posted
I assume you're having fun right now
I lost the battle to a cross-threaded #2 header.
everything and I mean *everything* was done @ 4:30 AM and I was just going between the H-pipe, the tailpipes, and the headers to cinch everything down (don't ask, MAC 4-flange headers SUCK) and the #2 primary was not going on straight.
I was looking at pulling the passenger header completely off, chasing/tapping the threads for #2 and bolting it all back on again. My estimate for that job was 2 hours so I gave up I'll get some ET's at Sears monday cause I can't wait! [ January 18, 2003, 12:46 PM: Message edited by: shade-tree ]
|
st5150
Member # 51
|
posted
With the amount of times you pull your heads on and off, just get some BBK 1 3/4" headers. You'll love the single flange.
|
hidnn.o.s.
Member # 1219
|
posted
Single flange is the only way to go!!!
|
hidnn.o.s.
Member # 1219
|
posted
When anyone gets back from Sac today let me know what JR in the black 99 cobra was able to run if you saw it. Thanks
|
Yellow94GT
Member # 431
|
posted
We didn't get to run today due to the dence fog. So everyone got a rain check. I really don't see why we weren't running. I have raced in much worse out there before.
|
shade-tree
Member # 298
|
posted
quote: Originally posted by Yellow94GT: We didn't get to run today due to the dence fog. So everyone got a rain check. I really don't see why we weren't running. I have raced in much worse out there before.
wow. I feel so much better about calling it quits at 4:30 AM last night now!! :shocked:
|
hidnn.o.s.
Member # 1219
|
posted
He must have been pissed. He said they turned him around last week also. Long drive for us
|
FasterDamnit
Member # 442
|
posted
Well since I left my damn key for my lug nuts at the house, it was just as well. Hopefully next Sat. will be just as cold, but clear! Good luck, Joe. Been there, done that, wasn't any fun.
|
98slowhoe
Member # 895
|
posted
I never get a damn chance to Freaking race!!!!! I just want to run my car one damn time, thats all i ask!
I have the Mac 4 Flage long tubes and I had no problem what so ever putting them on! But I heard the Shorties are a Bitch. I guess you might have the Shorties?
|
FasterDamnit
Member # 442
|
posted
Yup. Shorties. Looking to get long tubes eventually.
JL
|
st5150
Member # 51
|
posted
What diameter long tubes Jim?
|
FasterDamnit
Member # 442
|
posted
Chuckle, and start yet another heated debate? Whatever I can find cheap. The size is a secondary consideration since they will still be a big improvement over my Flowtech POS shorties. I do have a lot of time invested in them to clean out all the slag, open up the flanges and trim back the balls. Maybe I'll frame them...
|
season'd 88
Member # 169
|
posted
trim back the balls...and maybe youll frame them...thats just wrong
|
bunchmyfunky
Member # 360
|
posted
Rhett are you going tomorrow?
|
season'd 88
Member # 169
|
posted
quote: Originally posted by bunchmyfunky: Rhett are you going tomorrow?
cant make it tomorrow,i have a meeting at work.
|