T O P I C R E V I E W
|
SF Coupe
Member # 1810
|
posted
Went for my first runs on slicks last night. I couldn't launch it real hard since I don't have my torque boxes welded. I launched at 3k and managed a best of 13.48 @ 101.7 (1.93 60') from a best of 13.69 @ 103.6 on street tires.
On a side note there was almost a real bad wreck. A dragster went for a run and aborted and pulled to the side past the timing lights and no one noticed he hadn't pulled off the track. So they went ahead and sent the next guy who was running 8's @ 160+! [ July 24, 2004, 10:35 AM: Message edited by: SF Coupe ]
|
1SLOWLX
Member # 558
|
posted
what is your combo
|
HungryHippo
Member # 537
|
posted
so what happened? crash?
|
4.6 EATIN GM'S
Member # 1633
|
posted
ahhh,i have stock style suspension and my torque boxes aren't welded and last time out at the track i was using e.t drags at 15psi launching at 5800. so u can launch it harder but its amatter of time when shit starts to break
|
SF Coupe
Member # 1810
|
posted
my combo: edelbrock performer heads and intake, 65mm TB, shortys, high flow cats, 3.55s. I think the stock MAF is holding me back a little, along with my novice driving skills.
No crash, good thing for the dragster, cause it was an old school style with the driver in between the slicks.
|
red GT black rallyes
Member # 4495
|
posted
i would say 70 mm throttle body 73 mm c&l mass air meter o/r h or x pipe 24 pound injectors and meter calibrated for them and a cam if u dont already have one in
|
red GT black rallyes
Member # 4495
|
posted
oh and maybe a hi po clutch if u dont already have one
|