Author
|
Topic: Improved mph- broke stuff...
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Damn. Ran a string of 108.5/108.6mph runs (12.80's) and THEN- 108.913!. Open h-pipe, American Racer tires. Was pretty happy until I pull out on to Jackson Road and see a cloud behind me- coolant from my tail-pipes! The oil is fine- the head gaskets are o-ringed so they should not have failed. Probably a welded crack in one ex. port failed. Sigh- Get to pull the heads and have them tested.
Big thanks to bunchmyfunky for hangin' w/ me until the tow-truck finally made it.
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
AaronC
¯
Member # 86
|
posted
Well congrats on the new MPH. That sucks about having to pull the heads. That's where I'm at. This makes it the perfect time to notch those pistons and put a cam in! Then you'll be posting about 115 traps!
-------------------- 1991 GT Convertible: Stock 157k mile shortblock, HiTech cam, AFR 165 heads, Edelbrock RPM intake, 1 3/4 headers
12.23 at 112.99 Best MPH 113.97
Posts: 776 | From: woodland | Registered: Dec 2000
| :
|
|
Tyrant89
¯
Member # 1033
|
posted
Congrat's my friend!!!
I'm getting ready to pull off a head myself: stripped a plug hole on my TFS's.
I have a new itake & headers, so they are going on too. I'll let you know next time I head to the track.
Also, were going to Dave & buster's this Sunday. Stop by if your in the area.
Shaun
Posts: 260 | From: Salinas, holmes! | Registered: Mar 2002
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Thanks, Shaun. I will be wrenching Sunday. Appreciate the invite. Where is D&B's?
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Sorry to here about the car Jim.
Any mods going to come from this?
-------------------- AED
1994 GT Bucket that will likely never run 1999 SLOLEEN Twin Turbo Coyote 2008 F250 580 RWHP 1129 RWTQ
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
You must be psychic. Just happen to have a Prochamber and cat-back to put on. Electric fan after that (not yet acquired). Try for 110mph on stock cam. THEN custom cam.
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
See Jim, there is some good to come from this.
Every time something breaks it just means that something gets upgraded
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|
Stimson
_
Member # 51
|
posted
quote: Originally posted by AaronC: This makes it the perfect time to notch those pistons and put a cam in! Then you'll be posting about 115 traps!
I like this idea!
Welds broke on the exhaust side? Are these heads heavily ported or repaired?
Posts: 2373 | Registered: Jun 2000
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
One ex. port was repaired. Hope to pull it apart tomorrow.
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Stimson
_
Member # 51
|
posted
Pulled the heads yet? If so-how bad was the damage?
Posts: 2373 | Registered: Jun 2000
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Drew, Dan and Mark gave me a hand on Sat. Thanks, Guys! The ex. port that was previously welded cracked again at the edge of the weld. I hope to have it back by Thu. Should have the MAC cat-back to match the Prochamber already received.
JL
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
Yellow94GT
Mr. 60 FT
Member # 431
|
posted
Sweet deal Jim....I can't wait to see that baby run
Posts: 5990 | From: Cameron Park, Ca | Registered: Sep 2001
| :
|
|