T O P I C R E V I E W
|
Ryan_LX
Member # 7089
|
posted
What's up CA Fords. Does anybody have any recommendations for dyno tuning? I can't find any shops that will tune foxbody's anymore(with factory ecu).
|
Boss 327
Member # 9143
|
posted
Nate (ig:bullytuned_aka_elky406) still tunes foxes from what I heard.
|
Ryan_LX
Member # 7089
|
posted
quote: Originally posted by Boss 327: Nate (ig:bullytuned_aka_elky406) still tunes foxes from what I heard.
Who is Nate?
|
sic70stang
Member # 4347
|
posted
quote: Originally posted by Ryan_LX: quote: Originally posted by Boss 327: Nate (ig:bullytuned_aka_elky406) still tunes foxes from what I heard.
Who is Nate?
sounds like he tunes foxbodys
|
Boss 327
Member # 9143
|
posted
quote: Originally posted by Ryan_LX: quote: Originally posted by Boss 327: Nate (ig:bullytuned_aka_elky406) still tunes foxes from what I heard.
Who is Nate?
Nathan Schaldach. Owns the car ZUNIT
|
NEIGHT
Member # 8741
|
posted
That’s a real good question. I gave up on the stock setup because I didn’t know anyone who still tunes foxes. Now I just run the Holley terminator X on my fox and fuck does it run good!
|
SLOWSN95
Member # 8269
|
posted
There are very few people tuning the old EEC platforms nowadays. The problem is that the only way to datalog them is either with a RaceSystem snEEC-IV or with a stand-alone.
I tuned my own car using SCT, but I will more than likely be making the switch to Holley EFI.
Going back to Nate, I believe he tunes cars with a quarterhorse chip. Hit him up and ask because I could be wrong. But Holley EFI IMO is the way to go.
|
Rigo5.0
Member # 5247
|
posted
quote: Originally posted by NEIGHT: That’s a real good question. I gave up on the stock setup because I didn’t know anyone who still tunes foxes. Now I just run the Holley terminator X on my fox and fuck does it run good!
NEIGHT- How long have you been running the Term X? Any insight on the self-learning feature?
I am looking for a solution to tune my 331. Thought about Tweecer, but I don't have time to learn those tables.
|
SantaClara_Cobra
Member # 9488
|
posted
Had my car tuned at go wraps with a terminator x system. The car runs great but hesitates starting when hot. 331 stroker with a vortech V2. They’re the only guys I could find to tune the car. [ 2020-09-21, 09:26 PM: Message edited by: SantaClara_Cobra ]
|
SantaClara_Cobra
Member # 9488
|
posted
I can see why guys go coyote in California. I hate to say it but I can also see why they LS swap [ 2020-09-21, 09:25 PM: Message edited by: SantaClara_Cobra ]
|
Rigo5.0
Member # 5247
|
posted
quote: Originally posted by SantaClara_Cobra: Had my car tuned at go wraps with a terminator x system. The car runs great but hesitates starting when hot. 331 stroker with a vortech V2. They’re the only guys I could find to tune the car.
Thanks for sharing. Did the hesitation develop over time?
Going to continue doing research, but seems like the Term X is a good option.
|
Ryan_LX
Member # 7089
|
posted
I've thought about switching over to something like holley efi. Anybody know if this is smog legal?
|
theconductor
Member # 13458
|
posted
quote: Originally posted by Ryan_LX: I've thought about switching over to something like holley efi. Anybody know if this is smog legal?
It's not. No aftermarket tune is smog legal. Even with the stock ecu. Your best bet (if avoiding SCT) is to go with something like Megasquirt pnp where there's no visual difference from stock.
Unless the smog tech pulls your kick panel for some reason.
|
adower
Member # 5955
|
posted
Be careful with a tune. If you go to smog and don’t go Backnto smog you’ll get hit with a BAR.
|
SantaClara_Cobra
Member # 9488
|
posted
https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
|
theconductor
Member # 13458
|
posted
quote: Originally posted by SantaClara_Cobra: https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
I'm interested to hear more about this place. I'm looking for someone local to tune the fox. I have a great tuner in Florida working remote with me, but I'd love to hit the dyno.
|
NorCalRydaz
Member # 3233
|
posted
quote: Originally posted by SantaClara_Cobra: https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
Better you than me! Good thing you got lots of money.
Let us know what your new BFF can do in the tuning world for 302s with Superchargers......
|
SantaClara_Cobra
Member # 9488
|
posted
Finally fixed the hot start issue! I went looking on the forums and TILTON HT Starter solved my problem. [ 2020-12-14, 03:56 PM: Message edited by: SantaClara_Cobra ]
|
theconductor
Member # 13458
|
posted
quote: Originally posted by theconductor: quote: Originally posted by SantaClara_Cobra: https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
I'm interested to hear more about this place. I'm looking for someone local to tune the fox. I have a great tuner in Florida working remote with me, but I'd love to hit the dyno.
I emailed them the day I posted this for some information and have yet to hear back. Quality business model.
|
SantaClara_Cobra
Member # 9488
|
posted
quote: Originally posted by theconductor: quote: Originally posted by theconductor: quote: Originally posted by SantaClara_Cobra: https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
I'm interested to hear more about this place. I'm looking for someone local to tune the fox. I have a great tuner in Florida working remote with me, but I'd love to hit the dyno.
I emailed them the day I posted this for some information and have yet to hear back. Quality business model.
. The guy seems busy as hell. I know I hats not an excuse but I’d take a good shop with bad customer service over a shop that doesn’t know shit with good customer service. Trust me I’ve been there and seen them all. Here’s his number. His name is rich +1 (408) 828-4746 I haven’t tried them because I ended up fixing shit myself.
|
theconductor
Member # 13458
|
posted
quote: Originally posted by SantaClara_Cobra: quote: Originally posted by theconductor: quote: Originally posted by theconductor: quote: Originally posted by SantaClara_Cobra: https://www.instagram.com/p/CHRuvrnF8US/ I’ve been to two shops and I think this will be my 3rd
I'm interested to hear more about this place. I'm looking for someone local to tune the fox. I have a great tuner in Florida working remote with me, but I'd love to hit the dyno.
I emailed them the day I posted this for some information and have yet to hear back. Quality business model.
. The guy seems busy as hell. I know I hats not an excuse but I’d take a good shop with bad customer service over a shop that doesn’t know shit with good customer service. Trust me I’ve been there and seen them all. Here’s his number. His name is rich +1 (408) 828-4746 I haven’t tried them because I ended up fixing shit myself.
Thank you for the information. I already have a great mechanic locally, I was just hoping to find a nearby place to hop on the dyno to finalize the tune.
The tuner I've been using is in FL and does a fantastic job. I'll just stick with him and tune on the freeway.
|