T O P I C R E V I E W
|
93ex chp
Member # 9016
|
posted
Any shops around the pinole/richmond area that can do this? Looking to get it done asap please let me know
|
stanger00
Member # 13818
|
posted
The hardest part for this was getting enough room to swing the hammer to hit the punch. You can buy the NPT tap at Home Depot and buy some bearing grease at vato zone to coat the tap. Should take a few minutes.
|
93ex chp
Member # 9016
|
posted
Yeah seems pretty easy actually. What size punch do i use ?? Going to try it myself after reading up on it. Punch set grease and a tap set and i should be golden right?
quote: Originally posted by stanger00: The hardest part for this was getting enough room to swing the hammer to hit the punch. You can buy the NPT tap at Home Depot and buy some bearing grease at vato zone to coat the tap. Should take a few minutes.
|
stanger00
Member # 13818
|
posted
I don't know. On vortech website they have the installl manuals and list all the tools you need.
|
70stang351w
Member # 9948
|
posted
Found this may help..
http://www.superchargersonline.com/index.php?main_page=page&id=33
|
93ex chp
Member # 9016
|
posted
Helped alot thanks man appriciate the help!! quote: Originally posted by 70stang351w: Found this may help..
http://www.superchargersonline.com/index.php?main_page=page&id=33
|
70stang351w
Member # 9948
|
posted
No Problem just tryin to help
|