|
Author
|
Topic: need some assistance
|
9cobrasvt8
¯
Member # 11078
|
posted
 
 
I need a 7/8 inch hole drilled through my firewall for my temp sensor and both drills i have arent capable of doing it, who can i go to in sac to get the hole drilled? Or of i drill in stages will it work?
[ 2014-08-27, 01:45 PM: Message edited by: 9cobrasvt8 ]
--------------------
2013 Grabber blue coyote
1996 cobra
1996 gt h/c/i and gears
1998 cobra vert
1998 gt h/c/i
1997 gt blown
Posts: 1519 | From: under the hood | Registered: Jul 2011
| :
|
|
5.t0es
¯
Member # 5864
|
posted
youd probably need a 1/2" and you have a 3/8" drive, but yes,i would pilot hole in stages until I hit desired hole diameter.
Posts: 2990 | From: eb | Registered: Jul 2005
| :
|
|
9cobrasvt8
¯
Member # 11078
|
posted
quote:
Originally posted by 5.t0es:
youd probably need a 1/2" and you have a 3/8" drive, but yes,i would pilot hole in stages until I hit desired hole diameter.
Ya ive got a 1/2 inch and 3/8 inch drill, the 1/2 inch doesnt have enough power to just start with the 7/8 bit so ill start with smaller and work my way up, thank you
--------------------
2013 Grabber blue coyote
1996 cobra
1996 gt h/c/i and gears
1998 cobra vert
1998 gt h/c/i
1997 gt blown
Posts: 1519 | From: under the hood | Registered: Jul 2011
| :
|
|
5.t0es
¯
Member # 5864
|
posted
no problem ![[patriot]](graemlins/patriot.gif)
Posts: 2990 | From: eb | Registered: Jul 2005
| :
|
|
|
|
SIC9250
¯
Member # 8216
|
posted
This^
--------------------
Coyote_Mach1
Posts: 6959 | From: in the drivers seat. | Registered: Feb 2008
| :
|
|
|
|
9cobrasvt8
¯
Member # 11078
|
posted
Thanks for the advice guys, i bought the bits at harbor freight and got the hole drilled very easily
[ 2014-08-28, 10:15 PM: Message edited by: 9cobrasvt8 ]
--------------------
2013 Grabber blue coyote
1996 cobra
1996 gt h/c/i and gears
1998 cobra vert
1998 gt h/c/i
1997 gt blown
Posts: 1519 | From: under the hood | Registered: Jul 2011
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
