T O P I C R E V I E W
|
Ric88Notch
Member # 11660
|
posted
I'm getting rims for my 2013 and I was wondering what everyone that has lowered their coyote is using. Also what is everything I need ? -springs -panhard bar -camber bolts ?
Pics would be greatly appreciated. Thanks CAFORDS
|
14GT916
Member # 6399
|
posted
I'm in the same boat with my 2014. Mine is a DD and I would like something that rides comfortably as well as lower it. [ 2013-11-08, 07:39 PM: Message edited by: 14GT916 ]
|
Vallejo707
Member # 10296
|
posted
I used the sportline eibach spring kit. Lowers car 1.6 f & 1.7-2.0 r I also put on a panhard bar, or ealse your driver side is going to be .75 inches in. Some need it some dont. For the alignment I used camber bolts , but it dint need them . They dialed it in just fine without them, I put them on because I already had them.
|
swedensky
Member # 12185
|
posted
Eibach Pro kit BMR adjustable panhard bar
I would like to be lower (BMR, Ford K, or Sportlines) but for daily driving those are too low for me. I may end up doing it anyway simply because I like the look and can suffer the harsh ride. Mine rides like stock. If you use those springs or H&R SS you MAY need camber bolts but not always. I have a set if anyone needs them, as mine weren't necessary.
|
97cobra209
Member # 11376
|
posted
K springs here daily driver no problems at all I still need an alignment!
K springs Edelbrock pan bar Bmr relocation brackets Camber bolts [ 2013-11-08, 02:37 PM: Message edited by: 97cobra209 ]
|
97cobra209
Member # 11376
|
posted
Can't get a good picture!
|
92Chp
Member # 5574
|
posted
Do you know how many inches it lowers the car?
quote: Originally posted by 97cobra209: K springs here daily driver no problems at all I still need an alignment!
K springs Edelbrock pan bar Bmr relocation brackets Camber bolts
|
97cobra209
Member # 11376
|
posted
quote: Originally posted by 92Chp: Do you know how many inches it lowers the car?
quote: Originally posted by 97cobra209: K springs here daily driver no problems at all I still need an alignment!
K springs Edelbrock pan bar Bmr relocation brackets Camber bolts
It's 1.5" all the way around
|
TwelveFifty
Member # 13182
|
posted
bc coilovers, front hovers over the tire barely, rear on k springs, b&m adj panhard bar.
|