Author
|
Topic: 302 - 306
|
S550_Andres
¯
Member # 11083
|
posted
Around how much does it cost to turn a 302 to a 306 at a machine shop
-------------------- 86 notch coyote swapped 89 convertible 302 hci 85 notch 347 hci
Posts: 2747 | From: 650-408 | Registered: Jul 2011
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
why do you want a 306? does it need to be bored?
there is no HP gains
-------------------- 600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
Mr.10psi
¯
Member # 11062
|
posted
quote: Originally posted by 86_on_DD_machs: Around how much does it cost to turn a 302 to a 306 at a machine shop
its a bore and hone to accomodate the .030 piston. All the rest of the machining is just standard aka, milling deck, line hone mains etc. Bore and hone usually 150 or so. Been a while since i kept up with machine cost but should be close. The rest of the process is just checking to make sure everything is measures and clears everything else and lots of other details.
-------------------- 02 white saleen(sold) 347 stroker in the works
Posts: 1337 | From: 530 | Registered: Jul 2011
| :
|
|
triple b
¯
Member # 8763
|
posted
400+ gets you .30 overbore and new cam bearings installed
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|