This is topic T5 question in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=058487
Posted by 86_on_DD_machs (Member # 11083) on :
 
Is the tranny from a 4 banger an a 5.0 the same meaning you can put a t5 from a 5.0 into a 4banger or do you have to use a 4banger 5 speed tranny? My cousin just bought a 4banger that he wants to convert into a 5 speed.

Driveshaft
Tranny
Bell housing
Clutch
Clutch fork
Flywheel
Harness
Pressure plate
Peddles
Clutch cable
Clutch quadrant

Is this all e will need?

[ 2013-07-01, 09:31 PM: Message edited by: 86_on_DD_machs ]
 
Posted by ed650 (Member # 9897) on :
 
I think you will need a computer too.
 
Posted by 86_on_DD_machs (Member # 11083) on :
 
quote:
Originally posted by ed650:
I think you will need a computer too.
Don't think so cause weren't not swapping the engine yet
 
Posted by wilit (Member # 3367) on :
 
I think I remember the pilot shaft on the input shaft of a 4cyl is a smaller diameter than a 5.0. You can just swap out the input shaft if you need to. Not too difficult.

[ 2013-07-01, 09:43 PM: Message edited by: wilit ]
 
Posted by Sydewayz Stan (Member # 10217) on :
 
quote:
Originally posted by wilit:
I think I remember the pilot shaft on the input shaft of a 4cyl is a smaller diameter than a 5.0. You can just swap out the input shaft if you need to. Not too difficult.
Correct. The input shaft is smaller but also the gear ratios are different. The 5.0 t5 has taller gears so a banger tranny in a 5.0 will be like running 4.30 gears and a 5.0 tranny in a banger will be like running 2.00 gears lol
 
Posted by 86_on_DD_machs (Member # 11083) on :
 
quote:
Originally posted by Sydewayz Stan:
quote:
Originally posted by wilit:
I think I remember the pilot shaft on the input shaft of a 4cyl is a smaller diameter than a 5.0. You can just swap out the input shaft if you need to. Not too difficult.
Correct. The input shaft is smaller but also the gear ratios are different. The 5.0 t5 has taller gears so a banger tranny in a 5.0 will be like running 4.30 gears and a 5.0 tranny in a banger will be like running 2.00 gears lol
So in other words it's best to stick with a banger tranny? Until the swap is done?
 
Posted by Sydewayz Stan (Member # 10217) on :
 
quote:
Originally posted by 86_on_DD_machs:
quote:
Originally posted by Sydewayz Stan:
quote:
Originally posted by wilit:
I think I remember the pilot shaft on the input shaft of a 4cyl is a smaller diameter than a 5.0. You can just swap out the input shaft if you need to. Not too difficult.
Correct. The input shaft is smaller but also the gear ratios are different. The 5.0 t5 has taller gears so a banger tranny in a 5.0 will be like running 4.30 gears and a 5.0 tranny in a banger will be like running 2.00 gears lol
So in other words it's best to stick with a banger tranny? Until the swap is done?
Yea I would stick with a 4banger t5
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com