T O P I C R E V I E W
|
91blackonblack
Member # 11591
|
posted
can i see some pix of some of you guys 95- 8.8 rear ends on your foxes please.thinking bout doing that on my coupe.i just want to see how much it sticks out on foxes.thanks [ October 02, 2012, 08:36 PM: Message edited by: 91blackonblack ]
|
NEIGHT
Member # 8741
|
posted
Your Saleens gonna stick out the fenders Quan. [ October 02, 2012, 08:36 PM: Message edited by: NEIGHT ]
|
Greasy
Member # 5258
|
posted
The SN-95 rear end will stick your wheels out .750" on each side of the car. If you want to get rear disc buy some North Racecars brackets, get some Ranger axles, and rotors/calipers. You'll also need a booster, master, 3-2 conversion, and an adjustable proportioning valve.
|
blkfoxbody89
Member # 8361
|
posted
I'll get a booty shot of mine tomorrow, it has a stock length '97 cobra rear, w/ '05+ black powder coated bullets. Sticks out about .5" or less on each side with 275/50/zr17 khumo ecsta drags.. Def need to stiffen up rear suspension because they Cut an rub bad on turns. Especially driving 49, and 193.
|
91blackonblack
Member # 11591
|
posted
Ok thnx guys.i guys ill just go with a kit for the rear end i have now.or piece by piece.thnx tho
|
norcalfiddy
Member # 11207
|
posted
yea dont do a sn95 rear.. its ugly as shit
|
88gtstang
Member # 10370
|
posted
im runnung sn95 rearend with ranger axles and nrc brackets.... tires tuck in alot.. unless you are running deep dish like i am... also im running the 315's
|
91blackonblack
Member # 11591
|
posted
Pix pix pix.i would love to see.its my eye that will make the choice.
|
88gtstang
Member # 10370
|
posted
the rear tires tuck in quite a bit that if your not running deepdish.... once u run deepdish it will b flush they wont stick out
ill take pics of the rearend tommorow morning [ October 03, 2012, 02:47 AM: Message edited by: 88gtstang ]
|
91blackonblack
Member # 11591
|
posted
Looks good.thnx
|
VENOMUS PONY 5.0
Member # 7785
|
posted
Personally I would not do it. Unless your running 17x8 inch wheel then maybe anything x9 no bueno. As of now I have a 88 lx with a 98 cobra rear end and it's not the truth north race car brackets baby only way I would go.. one of my other gt's stock track and discs. [ October 03, 2012, 03:07 AM: Message edited by: VENOMUS PONY 5.0 ]
|
88gtstang
Member # 10370
|
posted
|
Ric88Notch
Member # 11660
|
posted
This is how my old coupe looked when i bought it.
18x9 18x10
stuck out in the back.
|
88gtstang
Member # 10370
|
posted
quote: Originally posted by VENOMUS PONY 5.0: Personally I would not do it. Unless your running 17x8 inch wheel then maybe anything x9 no bueno. As of now I have a 88 lx with a 98 cobra rear end and it's not the truth north race car brackets baby only way I would go..
+1
one of my other gt's stock track and discs.
|
91blackonblack
Member # 11591
|
posted
quote: Originally posted by Ric88Notch:
This is how my old coupe looked when i bought it.
18x9 18x10
stuck out in the back.
Thats the look i want right there.so did u do anything els to it?or just slapped it in there?
|
91blackonblack
Member # 11591
|
posted
quote: Originally posted by Ric88Notch:
This is how my old coupe looked when i bought it.
18x9 18x10
stuck out in the back.
Thats the look i want right there.so did u do anything els to it?or just slapped it in there?
|
Ric88Notch
Member # 11660
|
posted
quote: Originally posted by 91blackonblack: quote: Originally posted by Ric88Notch:
This is how my old coupe looked when i bought it.
18x9 18x10
stuck out in the back.
Thats the look i want right there.so did u do anything els to it?or just slapped it in there?
it was just like that. it stuck out past the fender. i never drove it like that it was a roller
|
hidnn.o.s.
Member # 1219
|
posted
quote: Originally posted by 91blackonblack: Thats the look i want right there.so did u do anything els to it?or just slapped it in there?
YOU WANT IT STICKING THAT FAR OUT THE BACK!?!?!? So you can't even drive the fucking thing?
$250............
|