|
Author
|
Topic: TOBIAS MOTORSPORTS FABRICATION AND CHASSISWORKS FTW!!!!!!!!!!!!!!!!!!!!!!!!!
|
TopNotch T-TOP
¯
Member # 9599
|
posted
 
TOBAIS DOES ANYTHING FROM ROLL CAGES THAT GET ""CERTIFIED"" FOR 7.50S 8.50S AND SO ON TO ANY FAB OR CHASSISWORK TO BUILDING 1000HP RACEMOTORS TO DOIN FUEL SYSTEMS THAT SUPPORT 2000 HP AND ANYTHING IN BETWEEN HE ALSO HAS DONE WORK FOR KEVIN LOCK AND CAPRI'R WHICH JUST HAPPEN TO BE TWO OF THE FASTEST IN OUR TOP 50 LIST
THIS IS A REAL ROLL CAGE
[ February 02, 2012, 01:54 PM: Message edited by: topnotcht-top ]
--------------------
1984 T-TOP NOTCHBACK MUSTANG
1993 Svt Cobra
Posts: 864 | Registered: Nov 2009
| :
|
|
BigBen
¯
Member # 10594
|
posted
I saw some nice cars, and fab work done at this shop.
it was nice meeting you today man, I was the guy who picked up the trunklid from Lee
[ January 31, 2012, 10:57 PM: Message edited by: BigBen ]
Posts: 445 | Registered: Jan 2011
| :
|
|
TopNotch T-TOP
¯
Member # 9599
|
posted
NICE TO MEET YOU TO BRO I AM THE OWNER OF THE BLUE T-TOP COUPE GET AT LEE IF YOU NEED ANY THING ELSE ![[patriot]](graemlins/patriot.gif) ![[burnout]](graemlins/burnout.gif)
[ January 31, 2012, 10:58 PM: Message edited by: topnotcht-top ]
--------------------
1984 T-TOP NOTCHBACK MUSTANG
1993 Svt Cobra
Posts: 864 | Registered: Nov 2009
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
tobais is one cool fucker an will always leaned a hand when need
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
TopNotch T-TOP
¯
Member # 9599
|
posted
[QUOTE]Originally posted by SS396 chevelle:
tobais is one cool fucker an will always leaned a hand when need [/QUOTE
HE IS DEFINITLY ONE OF THE MOST TRUSTED WHEN IT COMES TO WHAT HE DOES BEST IT SHOWS OVER AND OVER
--------------------
1984 T-TOP NOTCHBACK MUSTANG
1993 Svt Cobra
Posts: 864 | Registered: Nov 2009
| :
|
|
93coupessp
¯
Member # 8418
|
posted
+1 on the "real certifiable" cages
[ February 01, 2012, 12:16 AM: Message edited by: 93coupessp ]
--------------------
89 gt project
09 f250 diesel 605hp
14 cts-v
13 harley fxdb 103ci
Posts: 1919 | From: Hell | Registered: May 2008
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
contact info on this place?
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
Tobias Motorsports in Hayward (510)406-2272
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
86- 50
TEAM PLATINUM
Member # 4723
|
posted
quote:
Originally posted by 93coupessp:
+1 on the "real certifiable" cages
+1000
--------------------
My baby:88gt 347 stroker
RIP MATT, Gone but never forgotten
TEAM PLATINUM
Posts: 1796 | From: richmond | Registered: Jul 2004
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
quote:
Originally posted by racsirx:
Tobias Motorsports in Hayward (510)406-2272
Thanks Lee
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
89 306
¯
Member # 9042
|
posted
Dam now that some fabrication for ur ass man!!!!
Real welds real certifiable cages real fab work!!!
Tobias ftmfw
--------------------
02 mustang gt...mods soon to come!
89 lx: 306. edelbrock. heads..ported gt 40 manifolds..and all that other good stuff.
------------------
The ant-ghetto sign is no joke. Degrade this forum with ghetto behavior and get the boot. Ghetto behavior such as street slang, no regard for education (spelling & grammar) and threatening others with violence has no place on CAFords.com. Please find another forum to demonstrate such behavior.
Posts: 1268 | From: richmond | Registered: Mar 2009
| :
|
|
Blk93pny
¯
Member # 11387
|
posted
looks like excellent work
Posts: 707 | Registered: Oct 2011
| :
|
|
TopNotch T-TOP
¯
Member # 9599
|
posted
quote:
Originally posted by TorchRed03:
looks like excellent work
IT DEFINITELY IS THE PICS DONT TO ANY JUSTICE FOR THE WORK DONE IN THAT SHOP YOU MUST SEE IT TO BELIVE IT
--------------------
1984 T-TOP NOTCHBACK MUSTANG
1993 Svt Cobra
Posts: 864 | Registered: Nov 2009
| :
|
|
SydeWaySix
CAFords OG
Member # 3596
|
posted
Looks like some great fab work. FOD can handle that just as well though ![[Wink]](wink.gif)
--------------------
2013 Boss 302 #356. Performance White. Stock.
1965 Fastback GT Restored to stock spec.
Posts: 9882 | From: Bay Area | Registered: Dec 2002
| :
|
|
TopNotch T-TOP
¯
Member # 9599
|
posted
quote:
Originally posted by SydeWaySix:
Looks like some great fab work. FOD can handle that just as well though
can you show any roll cages that have been done by F.O.D that have been 7.50 certified or even 8.50??????????? if so please let me know me because i can get my car towed there tommorrow and order a full 8 point moly cage subframe connectors therw the floors boards anti roll bar that will be needed to be preloaded to be adjusted and fuel cell installed with the spare tire tire tub cuttout and fabracated to hold a 15gallon fuel cell
--------------------
1984 T-TOP NOTCHBACK MUSTANG
1993 Svt Cobra
Posts: 864 | Registered: Nov 2009
| :
|
|
iron50
¯
Member # 11231
|
posted
quote:
Originally posted by topnotcht-top:
quote:
Originally posted by SydeWaySix:
Looks like some great fab work. FOD can handle that just as well though
can you show any roll cages that have been done by F.O.D that have been 7.50 certified or even 8.50??????????? if so please let me know me because i can get my car towed there tommorrow and order a full 8 point moly cage subframe connectors therw the floors boards anti roll bar that will be needed to be preloaded to be adjusted and fuel cell installed with the spare tire tire tub cuttout and fabracated to hold a 15gallon fuel cell
There is nothing to be worry about, we have Autodesk Inventor Professional 2012, Robot Structural Analysis Professional 2012, Mechanical Desktop 2010 and Autocad full system 2012, as you can see we can even make the 3D drawing of the whole car frame and run a Finite Element Analysis (FEA) to verify any stress and strain in the frame and the weld, is this enough for you?, i hope that you know what is all this software about. Bring you car tomorrow
--------------------
You mama
Posts: 2025 | From: san pablo cal | Registered: Aug 2011
| :
|
|
Brandonn
CAFords OG
Member # 632
|
posted
LOL WTF does any of that shit have to do with building a nhra cage ? and no computer will tell you what suspension settings will work. I work in THE MOST HIGH TECH CHASSIS SHOP IN THE COUNTRY ! And we dont use any of that shit to build our cages. Many other parts yes. Tobias does do good work seen a lot of it at the track. I cant speak to your work because i have never seen it in person. Not saying you do bad work or not. but the fact that you tried to throw out that you have a bunch of cool guy computer software, that dont mean shit, does concern me a little.
Posts: 299 | Registered: Dec 2001
| :
|
|
86- 50
TEAM PLATINUM
Member # 4723
|
posted
quote:
Originally posted by Brandonn:
LOL WTF does any of that shit have to do with building a nhra cage ? and no computer will tell you what suspension settings will work. I work in THE MOST HIGH TECH CHASSIS SHOP IN THE COUNTRY ! And we dont use any of that shit to build our cages. Many other parts yes. Tobias does do good work seen a lot of it at the track. I cant speak to your work because i have never seen it in person. Not saying you do bad work or not. but the fact that you tried to throw out that you have a bunch of cool guy computer software, that dont mean shit, does concern me a little.
+1, a computer can't teach you how to make a rollcage. Tobias don't use no computer also. Just for fun i googled those software and couldn't find nothing about them getting a cage to cert.
--------------------
My baby:88gt 347 stroker
RIP MATT, Gone but never forgotten
TEAM PLATINUM
Posts: 1796 | From: richmond | Registered: Jul 2004
| :
|
|
Brandonn
CAFords OG
Member # 632
|
posted
all you need to build a cert legal cage, any spec all the way to a 25.1 is a nhra rule book, it tells you where all the bars have to go
Posts: 299 | Registered: Dec 2001
| :
|
|
iron50
¯
Member # 11231
|
posted
I don't have time right now my shop is full , any time you or any body , can bring a inspector or engineer , my shop is open for any body and see my work Thanks cafords We have a engineer. Working on 3 cars there going to be on the racing track , sponsor buy F.o.D #1 for drifting # 2 roll racing #3 Drag racing !
--------------------
You mama
Posts: 2025 | From: san pablo cal | Registered: Aug 2011
| :
|
|
Brandonn
CAFords OG
Member # 632
|
posted
quote:
Originally posted by iron50:
I don't have time right now my shop is full , any time you or any body , can bring a inspector or engineer , my shop is open for any body and see my work Thanks cafords We have a engineer. Working on 3 cars there going to be on the racing track , sponsor buy F.o.D #1 for drifting # 2 roll racing #3 Drag racing !
Well let me know how your engineer does designing a NHRA legal cage. If you need a kit hit up my work, we prob have them in stock
www.cachassisworks.com
Posts: 299 | Registered: Dec 2001
| :
|
|
iron50
¯
Member # 11231
|
posted
Tobais ! Beatifull work End of conversation
--------------------
You mama
Posts: 2025 | From: san pablo cal | Registered: Aug 2011
| :
|
|
TopNotch T-TOP
¯
Member # 9599
|
posted
quote:
Originally posted by iron50:
I don't have time right now my shop is full , any time you or any body , can bring a inspector or engineer , my shop is open for any body and see my work Thanks cafords We have a engineer. Working on 3 cars there going to be on the racing track , sponsor buy F.o.D #1 for drifting # 2 roll racing #3 Drag racing !
tell your drag racing car ill race it for $2000 when ever its ready and make it a $500 punk out fee so it cant bull**** itz way out and as far as youR so called "ENGINEER" IM PRETTY SURE HE CANT CERTIFY ANY ROLL CAGED CARS THAT COME FROM YOUR SHOP DUE TO THERE ONLY BEING 2 GUYS THAT I KNOW OF IN NOR-CAL THAT CERT CAGES!!!!!!!!
[ February 01, 2012, 01:32 PM: Message edited by: topnotcht-top ]
Posts: 864 | Registered: Nov 2009
| :
|
|
Brandonn
CAFords OG
Member # 632
|
posted
And just a FYI it is impossible to "copy" a cage from chassis works. The bender that they use uses a special bending process that pushes the metal to the bend point, keeping the out side of the bend just as thick as it was before it was bent. So just because you buy a chassis works cage and bend it the same dont make it the same. unless you have a million dollar bender
Posts: 299 | Registered: Dec 2001
| :
|
|
svfreerider87
¯
Member # 5748
|
posted
quote:
Originally posted by Brandonn:
And just a FYI it is impossible to "copy" a cage from chassis works. The bender that they use uses a special bending process that pushes the metal to the bend point, keeping the out side of the bend just as thick as it was before it was bent. So just because you buy a chassis works cage and bend it the same dont make it the same. unless you have a million dollar bender
I believe you are refferring to a mandrel bender. The software is helpful in showing the customer what the final product will be and is much cheaper than trial and error by fabbing products, but in the end you need the nhra book to show you what they expect and a fabricator that's up to par, so software or not, i'm sure you both do great work, not everyone runs their business the same.
--------------------
Dreamspeed Motorsports
Posts: 1685 | From: Sunnyvale | Registered: Jun 2005
| :
|
|
Topic Closed
Email this post to someone!
Printer friendly view of this Ford topic
