This is topic Pick N Pull question in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=046893
Posted by MikeD. (Member # 8060) on :
 
Anyone know if you buy spindles, say off a 95 stang, I they charge you for the hub too?
 
Posted by NEIGHT (Member # 8741) on :
 
One thing you should know is that Pick N Pull charge for every little thing they can. Last time I wen some dumbass lady went and found shoes in a trunk N asked them if they sold shoes N of course they said yes N charged her $5 for them
 
Posted by Adam5.0 (Member # 6995) on :
 
when i got my spindles they did
 
Posted by 50Reasons (Member # 6452) on :
 
quote:
Originally posted by MikeD.:
Anyone know if you buy spindles, say off a 95 stang, I they charge you for the hub too?
Yes they do
 
Posted by MikeD. (Member # 8060) on :
 
Thooooooose fucks. Hmmm... Wonder how I can stuff some spindles in my pants?
 
Posted by asskickn88 (Member # 4957) on :
 
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
 
Posted by SHOalex (Member # 7720) on :
 
quote:
Originally posted by asskickn88:
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
YES! hahaha fuck those guys thats why I have no moral issues as well stealing from those dick. some asshole tried to get tough with my brother over a relay as if they paid him enough to fight or something.
 
Posted by topnotcht-top (Member # 9599) on :
 
yo mike i went to buy some rear calipers frm a 96 cobra they tried to charge me for the lines brackets pads and hardware that shit came out to 80 bucks i said fucK this bull**** i went on craigslit and got a whole entire cobra rearend for 100 bucks and if your lookin for spindels holler at MUSTANGGUY TIM 209-472-7669 his prices are pretty good and it will be shiped to your front door if you like

[ April 05, 2011, 03:32 AM: Message edited by: topnotcht-top ]
 
Posted by asskickn88 (Member # 4957) on :
 
quote:
Originally posted by SHOalex:
quote:
Originally posted by asskickn88:
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
YES! hahaha fuck those guys thats why I have no moral issues as well stealing from those dick. some asshole tried to get tough with my brother over a relay as if they paid him enough to fight or something.
I've picked up 5 drop out center sections out of BMW's to resell and like the Cobra, its an independent rear. I took the center section up and the chick tried to charge me for a whole rear end, I told her it was a drop out, she told me no it wasn't. We argued and I asked to talk to a manager, she tried to keep me from talking to anyone else..... fuck that, I spent time dropping it out and wasn't going to leave without it. Luckily someone else overheard and got another worker that took care of the problem, that bitch was pissed! They pay a couple hundred bucks for a car and expect to make $2500 off each of em then scrap the shell for even more.
 
Posted by Musttanguy (Member # 2251) on :
 
Looking at the PnP website pricing for the 94/95 spindles with hubs and backing plates you "could" be looking at the following:
Spindles- $29.98 each
Hubs- $16.48 each
Backing plates- $13.98 each
Environmental fees- something like 4%
sales tax- 9%
entrance fee $2

By the time you are done it "could" cost you $139 plus your time, this is taking into account they do charge for every item.

OR you can buy these (shipping usually $20) for $175
http://www.californiafords.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=086054
Which come with the ball joint spacers and caliper bolts.......
 
Posted by Blind (Member # 3052) on :
 
I paid $90 on a 1/2 price weekend for -
spindles, hubs, rotors, calipers, pads, brake hoses, and front lower control arms from a `95 GT.

Took me 20 minutes to unbolt the struts, brake hoses, and control arm bolts from the K-member, in and out nice and fast!

I also got a complete turbocoupe 3.55 rear end with everything on it for $120.
Took me 30 minutes to drop that one, drive shaft bolts, control arm bolts, center brake hose, e-brake cables, shocks. Super easy.

go on a 1/2 price weekend, a little busier but better deals and you don't have to strip a bunch of shit off the parts to pay what you want for them.

[ April 05, 2011, 01:32 PM: Message edited by: Blind ]
 
Posted by 50DADDY (Member # 3076) on :
 
quote:
Originally posted by SHOalex:
quote:
Originally posted by asskickn88:
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
YES! hahaha fuck those guys thats why I have no moral issues as well stealing from those dick. some asshole tried to get tough with my brother over a relay as if they paid him enough to fight or something.
+1,000,000!!!!!!!!!!! [patriot]
 
Posted by 94 N.C.F. GT (Member # 3946) on :
 
quote:
Originally posted by 50DADDY:
quote:
Originally posted by SHOalex:
quote:
Originally posted by asskickn88:
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
YES! hahaha fuck those guys thats why I have no moral issues as well stealing from those dick. some asshole tried to get tough with my brother over a relay as if they paid him enough to fight or something.
+1,000,000!!!!!!!!!!! [patriot]
lol I think everyone does this
 
Posted by 68stanger (Member # 7842) on :
 
quote:
Originally posted by SHOalex:
quote:
Originally posted by asskickn88:
They'll hit you for the backing plates too, no joke, they did that to me before. I just purchased a dash and had to pull everything off to be charged for a pad instead of a complete dash. The guy saw a small plastic vent hose and tried to hit me for the complete one..... that's why I snag ANYTHING I can get in my pockets or the bottom of my tool bag.
YES! hahaha fuck those guys thats why I have no moral issues as well stealing from those dick. some asshole tried to get tough with my brother over a relay as if they paid him enough to fight or something.
Then you gotta bring it to the next level, pull the mighty hammer of Thor out the tool bag. [Wink]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com