This is topic 1995 cobra cam swap ??? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=045783
Posted by t top freak (Member # 6269) on :
 
well im looking at a 1995 cobra this weekend or early next week. its got all the bolt ons, some suspension work and 3.73's.
if i buy this car ill probably end up rebuilding the motor but keeping the gt40/cobra set up with some minor porting.
my question is which off the shelf cam i should go with. with such a mild street set up i cant justify getting a custom cam.
holy hell its going to be nice to be in a mustang again [Smile]
 
Posted by CobramanPhil (Member # 2170) on :
 
Well if you are going to get the heads ported and then keep the combination basically the same then you can still get a custom cam. Be forewarned though as any cam swap will at least require some fiddling with the idle (get a tune or tune yourself with a piggyback controller) due to the 94-95 computers. I mean you can do without, but it will do a lot better with some tuning.
 
Posted by JohnB (Member # 969) on :
 
Are you going to keep the 1.7 rockers? If so, run the Comp 2031 cam. it works with the 1.7's, doesn't throw a fit with the 94-95 computers, and works great. It's smog legal too.
 
Posted by asskickn88 (Member # 4957) on :
 
Screw that, go with a TFS stage 3!!! Go big or go home [Big Grin] If your going to run the 1.7's I hear the B303 works very well with those too.
 
Posted by t top freak (Member # 6269) on :
 
haha those were the two i was looking at...and the camzilla.

as for the rockers, i was planning on just using the 1.7s
 
Posted by Hungry Hippo (Member # 537) on :
 
2031 is a really good cam for 94/95's
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com