T O P I C R E V I E W
|
Eddie510-
Member # 2354
|
posted
How do safely take it off without messing up paint? [ May 01, 2010, 05:35 PM: Message edited by: Eddie510- ]
|
SPTVENM
Member # 7080
|
posted
Goo gone?
|
Eddie510-
Member # 2354
|
posted
dont know if i should try it.. I heard of the rubber eraser wheel you hook up to a compressor but thats 100$ lol
|
primed351
Member # 8613
|
posted
The rubber eraser works the best, go to a body shop I'm sure theyle do it for cheap.
|
Eddie510-
Member # 2354
|
posted
quote: Originally posted by primed351: The rubber eraser works the best, go to a body shop I'm sure theyle do it for cheap.
yeah ive been youtubing it right now,lol this guy is using a rubber from a door stopper .lol check it out Rubber tool
|
primed351
Member # 8613
|
posted
That's hella funny u just gotta be carefull not to burn the paint. How much are you trying to get off
|
AbominableSnoman...
Member # 8290
|
posted
I've used 3m adhesive remover in the past. Works wonders. I think its $7 for a can.
|
NCALSVT
Member # 3205
|
posted
quote: Originally posted by Eddie510-: dont know if i should try it.. I heard of the rubber eraser wheel you hook up to a compressor but thats 100$ lol
all lies,eraser wheel s like 13.00 and u hook it up to a drill and then get alcohol and wipe clean,I got the eraser whee hit me up
|
slidewayz94
Member # 3101
|
posted
I just removed a bunch of stickers and graphics off my jet ski. Used a heat gun, plastic razor blade, 3M Adhesive remover.
Wash and wax after
|
dubfive-0
Member # 8965
|
posted
heat gun + plastic puddy knife & some rubbing compound & wax to finish it off
|
50Reasons
Member # 6452
|
posted
Oven off
|
LX306hatch
Member # 9151
|
posted
i have been in the auto body industry my whole life i have been there done that words of advice dont use gu gone it duls clear you could use a wax and grease remover but it will take longer
the best way to take off double side tape such as the stuff that holds on side moldings on the door ect.... is the eraser wheel then buff it to make it look like it was never there also depends on the color of paint it might be brighter up inder the molding or whatever you took off it but eraser wheel the only and the best but even using that is risky to damage the clear coat be carefull good luck
|
hard jokur
Member # 3360
|
posted
Becareful with the eraser. The shop that did my car burned my mouldings and now I have to replace them.
|
Luke87GT
Member # 21
|
posted
Solvent X
|
50Reasons
Member # 6452
|
posted
quote: Originally posted by 50Reasons: Oven off
Realy works and does not go past clear coat spray and let sit for 8 min and wipe off that easy
|
73 on DUBS
Member # 5677
|
posted
eraser wheel the best thing u could use wont damage paint either wipe the excess off with thinner then use rubbing compound and wax
|