T O P I C R E V I E W
|
muvybuff
Member # 9100
|
posted
I took my tired 5.0 to BRG and got 300 RWHP & 340 RWTQ. Rebuilt the same car to 331 Stroker took car back to BGR and got 320 RWHP & 440 RWTQ.
After talking to BGR I learned their good with motorcycles and not cars. I found a different DYNO Shop in Hayward who had re-done several BGR Tunes. With the new tune done in Hayward my car DYNO'd @ 420 RWHP & 480 RWTQ @ half the cost of BGR.
Be careful with these so called DYNO TUNES. Read a lot and ask a lot of questions about the DYNO, fuel mapping, calibrations, injector loads, and the technician's qualifications.
|
fasthatch
Member # 7277
|
posted
what was bad about an this should be in the tech section
|
SydeWaySix
Member # 3596
|
posted
Where is BGR located? I think I've heard of them..but from what I know they make aftermarket motorcycle parts
I'm glad you found another shop in Hayward taht worked out for you....was it Rick at Gearhead/Rob's Machine shop?
|
92_5.0
Member # 7624
|
posted
quote: Originally posted by SydeWaySix: Where is BGR located? I think I've heard of them..but from what I know they make aftermarket motorcycle parts
I'm glad you found another shop in Hayward taht worked out for you....was it Rick at Gearhead/Rob's Machine shop?
Had my engine built by Rob and Im taking my car to Rick's today [ April 05, 2010, 07:17 PM: Message edited by: 92_5.0 ]
|
EPIK
Member # 7481
|
posted
Don't you mean "BRG"?
|
95331StrimVert
Member # 6250
|
posted
Hey Muvybuff, What Dyno does the shop in Hayward use? Where there any other indications other then good numbers that upset you about BRG? They use a Mustang dyno, very different from a dynojet. The mustang dyno will read lower.
You made good numbers either way. what is your setup?
|
92_5.0
Member # 7624
|
posted
quote: Originally posted by 95331StrimVert: Hey Muvybuff, What Dyno does the shop in Hayward use? Where there any other indications other then good numbers that upset you about BRG? They use a Mustang dyno, very different from a dynojet. The mustang dyno will read lower.
You made good numbers either way. what is your setup?
very true, if thats the case then those are pretty good numbers.
|
89foxstang
Member # 5908
|
posted
what was the issue if i may ask? im a little surprised to be honest considering i havent heard about anyone having problems with their tune? what was the issue?
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 89foxstang: what was the issue if i may ask? im a little surprised to be honest considering i havent heard about anyone having problems with their tune? what was the issue?
is chris still with brg
|
JohnB
Member # 969
|
posted
Movin' this to General Talk.
Also, coming on a forum without any info other than "they can't tune" is pretty pointless.
|
89foxstang
Member # 5908
|
posted
Yes both Chris' still work here. Op feel free to give us a call!
|
adower
Member # 5955
|
posted
I had my car tuned by BRG. S-trim Vortec. I am happy with it. I blew a HG but that was my own fault. Even then they were helpful with having my tune saved and going over it with me on the phone.
Thats crazy how you gained 100rwhp though! [ April 06, 2010, 08:47 PM: Message edited by: adower ]
|
BlowN67
Member # 4229
|
posted
i think there was another car off this board that came out with low numbers from that shop.
|
maeco
Member # 2578
|
posted
Brg(chris) tuned mine at 420 rwhp no issues and happy with the service..
|
forced331
Member # 1270
|
posted
I think BRG has a Mustang Dyno, in which will result in 10-15% less Hp shown compared to a Dynojet.
|
fasthatch
Member # 7277
|
posted
quote: Originally posted by 89foxstang: Yes both Chris' still work here. Op feel free to give us a call!
tell chirs dave from big valley ford said whats up
|
East Bay 50
Member # 8081
|
posted
quote: Originally posted by maeco: Brg(chris) tuned mine at 420 rwhp no issues and happy with the service..
I thought you went to AED?
|
maeco
Member # 2578
|
posted
quote: Originally posted by East Bay 50: quote: Originally posted by maeco: Brg(chris) tuned mine at 420 rwhp no issues and happy with the service..
I thought you went to AED?
nah i had bugs that couldnt be iron out so it left with 3 something,turned out dirty mass air. so i left the car with chris and took care of me
|
threethirty1
Member # 7814
|
posted
quote: Originally posted by muvybuff: 320 RWHP & 440 RWTQ.
These are impossible sorry, without nitrous or turbo.
|
threethirty1
Member # 7814
|
posted
quote: Originally posted by muvybuff: DYNO'd @ 420 RWHP & 480 RWTQ
I would love to see this NA 331 combo. Post a graph.
|
SydeWaySix
Member # 3596
|
posted
quote: Originally posted by threethirty1: quote: Originally posted by muvybuff: DYNO'd @ 420 RWHP & 480 RWTQ
I would love to see this NA 331 combo. Post a graph.
Thats what I'm sayin! I need to put together THAT combo before I start tearing my top-end apart!
|
92stangLX
Member # 3252
|
posted
quote: Originally posted by SydeWaySix: quote: Originally posted by threethirty1: quote: Originally posted by muvybuff: DYNO'd @ 420 RWHP & 480 RWTQ
I would love to see this NA 331 combo. Post a graph.
Thats what I'm sayin! I need to put together THAT combo before I start tearing my top-end apart!
Sounds like a typo.. let's see BOTH dyno graphs.. I am curious
|
89point.
Member # 6078
|
posted
Op did u not like BRGs work or BGRs work.. If u can't get the name of the shop correctly then how can we believe anything else is correct too??
|