|
Author
|
Topic: cams for 01 cobra
|
blk01snake
¯
Member # 8848
|
posted
 
 
anyone know a shop besides AED not that i have anything against shaun, that does cams for 4v at a decent rate i just dont want to drive to shingle springs to get my car worked on iam in sac
Posts: 164 | From: sacramento | Registered: Jan 2009
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
Posts: 3653 | From: the land of the lost | Registered: Sep 2005
| :
|
|
gtowned
¯
Member # 8156
|
posted
quote:
Originally posted by blk01snake:
anyone know a shop besides AED not that i have anything against shaun, that does cams for 4v at a decent rate i just dont want to drive to shingle springs to get my car worked on iam in sac
well if you dont wanna spend 30 mins driving to shingle springs you can spend 2 hrs driving to the bay.aed is closest to sac
--------------------
Taking terminators off the road one at a time...
Posts: 1106 | From: Sacramento | Registered: Jan 2008
| :
|
|
Nastysvt
¯
Member # 6431
|
posted
quote:
Originally posted by gtowned.:
quote:
Originally posted by blk01snake:
anyone know a shop besides AED not that i have anything against shaun, that does cams for 4v at a decent rate i just dont want to drive to shingle springs to get my car worked on iam in sac
well if you dont wanna spend 30 mins driving to shingle springs you can spend 2 hrs driving to the bay.aed is closest to sac
+1 thats a pretty convenient drive compared to where most people come from to go there..
--------------------
Built 98 Cobra
Built C6 Z06
Daily TBSS
Posts: 2575 | From: Valley to the Bay | Registered: Jan 2006
| :
|
|
68gtscode
¯
Member # 8679
|
posted
quote:
Originally posted by blk01snake:
anyone know a shop besides AED not that i have anything against shaun, that does cams for 4v at a decent rate i just dont want to drive to shingle springs to get my car worked on iam in sac
I agree with the other posts, you are very lucky to be so close to AED... I put all my cars on flatbeds from the bay area so Shaun and Drew can work on them. When I move away from California, I will ship my cars from where ever I live (even if it's across the country) for them to do major work. Long story short, you are extremely close to AED- CONSIDER YOURSELF LUCKY AND DON'T CUT CORNERS.
Posts: 293 | From: NM (505) | Registered: Oct 2008
| :
|
|
LQ9SN95
¯
Member # 7080
|
posted
quote:
Originally posted by 68gtscode:
quote:
Originally posted by blk01snake:
anyone know a shop besides AED not that i have anything against shaun, that does cams for 4v at a decent rate i just dont want to drive to shingle springs to get my car worked on iam in sac
I agree with the other posts, you are very lucky to be so close to AED... I put all my cars on flatbeds from the bay area so Shaun and Drew can work on them. When I move away from California, I will ship my cars from where ever I live (even if it's across the country) for them to do major work. Long story short, you are extremely close to AED- CONSIDER YOURSELF LUCKY AND DON'T CUT CORNERS.
+1
shit i just drove to AED today from san jose to drop my car off.....long drive but well worth it! Shaun and Drew are cool peeps and they know their stuff real good ![[worship]](graemlins/worship.gif) ![[patriot]](graemlins/patriot.gif)
--------------------
http://www.fastgms-teamfast.com
http://www.facebook.com/aop.fresno?ref=ts&fref=ts
Lq9 swap
102 fast intake
Trick flow heads
T rex cam
Posts: 8031 | From: Fresno, Ca | Registered: Sep 2006
| :
|
|
stangin'
¯
Member # 514
|
posted
if i'm reading between the lines correctly, the OP is looking for a lower rate shop than can do decent work.
Posts: 2993 | From: Bay Area | Registered: Oct 2001
| :
|
|
LETHL 03
¯
Member # 5401
|
posted
quote:
Originally posted by stangin':
if i'm reading between the lines correctly, the OP is looking for a lower rate shop than can do decent work.
thats what i was thinking
--------------------
RIP Willie Guzman LQ9SN95
Hard Head Muscle
#HHM #babydickcobra #lethl03
Posts: 4128 | From: 702 HHM | Registered: Feb 2005
| :
|
|
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
[ July 28, 2009, 12:51 PM: Message edited by: slow96cobra ]
Posts: 3653 | From: the land of the lost | Registered: Sep 2005
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
do you understand how to degree a cam
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
do you understand how to degree a cam
i hear is hella hard and the engine has to be apart plus i have 4 cams. i think im losing power there.
Posts: 3653 | From: the land of the lost | Registered: Sep 2005
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
do you understand how to degree a cam
i hear is hella hard and the engine has to be apart plus i have 4 cams. i think im losing power there.
you should google how to degree a cam b/c i don't think there any way you could degree a overhead cam motor
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
blk01snake
¯
Member # 8848
|
posted
i wasnt asking if there was a cheaper shop i know you get what you pay for but was just curious some people on here seems like they ride shaun and drews nuts they do good work but are not the only good ones in the buisness
Posts: 164 | From: sacramento | Registered: Jan 2009
| :
|
|
68gtscode
¯
Member # 8679
|
posted
quote:
Originally posted by blk01snake:
i wasnt asking if there was a cheaper shop i know you get what you pay for but was just curious some people on here seems like they ride shaun and drews nuts they do good work but are not the only good ones in the buisness
There is a reason for this. I agree AED is not the only good shop, but they are one of the best in the country and happen to be in your back yard, literally. If you want to take your money elsewhere, your choice... I work too hard for mine to risk throwing it away.
[ July 28, 2009, 09:32 PM: Message edited by: 68gtscode ]
Posts: 293 | From: NM (505) | Registered: Oct 2008
| :
|
|
|
|
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
i have a question as well. is there a shop that can DEGREE my CAMS and for how much?
how an the hell would you degree your cams with them over the pistion
do you understand how to degree a cam
i hear is hella hard and the engine has to be apart plus i have 4 cams. i think im losing power there.
It's dificult. I've done it. Took a few special tools (had to make them at the time) and a LOT of time. Not worth the effort IMO unless you do it yourself. Why pay a shop $100/hr for nearly a days worth of labor to degree in stock stuff.
But yes, there are *possible* gains to be had. Each of the 7 timing gears have roughly 4 degrees of play.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
quote:
Originally posted by fasthatch:
quote:
Originally posted by slow96cobra:
http://www.carcraft.com/howto/116_0701_how_to_degree_a_camshaft/index.html
do you see were the cam is at on that engine it's in the block not in the heads like your engine do you understand that if your cams are not perfect line up the valves will hit the pistion.so please buy so books go to school do anything but work on cars please
no i dont work on cars i have a better job that pays better. so dont worry
Posts: 3653 | From: the land of the lost | Registered: Sep 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
