|
Author
|
Topic: what does it cost to have have a 6al rebuilt?
|
fastertoys1
¯
Member # 5270
|
posted
 
 
i have a 6al and msd distributors that are not working corectly id like to send them back to msd to have them checked out. what am i looking to spend on each item?
im not the original purchaser so im not able to take advatage of a warentey
Posts: 2178 | Registered: Jan 2005
| :
|
|
88DroptopGT
¯
Member # 2535
|
posted
915-855-7123 Give MSD a call!
Posts: 3978 | From: 707 | Registered: Mar 2003
| :
|
|
166 Merlo
FELONY
MOTORSPORTS
Member # 1549
|
posted
It was actually not that bad for me - depends what's wrong with it. I got my box wet and had to send it in. They replaced a diode, resistor shorted updated it to 2009 standards (box was og purchased in 99). All together with shipping ran me $45
--------------------
'89 - Boss Coupe
'70 - Drop Cutthang
'68 - Cougnut
'87 - 0166, Its real
Posts: 3954 | From: Thebay | Registered: Jul 2002
| :
|
|
fastertoys1
¯
Member # 5270
|
posted
dahm thats not bad, hope its a simple fix for me
Posts: 2178 | Registered: Jan 2005
| :
|
|
Notch1320
Man Pedal
Member # 2647
|
posted
You are better off throwing the MSD Distributor in the garbage.... it will same you money in the end.
Get an RMA number from MSD for the box, and be sure you have it wired correctly. Check your engine grounds too.
There is a reason Nascar guys run two MSD boxes, with a switch!
Posts: 2349 | From: Yuba City, CA | Registered: Mar 2003
| :
|
|
DRIVINFST
¯
Member # 2430
|
posted
quote:
Originally posted by Notch1320:
You are better off throwing the MSD Distributor in the garbage.... it will same you money in the end.
Get an RMA number from MSD for the box, and be sure you have it wired correctly. Check your engine grounds too.
There is a reason Nascar guys run two MSD boxes, with a switch!
Exactly, throw it away and get a Crane box. When I worked at Summit a ton of MSD boxes would come back. I've had both a 6AL and a Digital 6 take a crap me.
Posts: 555 | From: San Jose, CA | Registered: Feb 2003
| :
|
|
MachYou
¯
Member # 7934
|
posted
quote:
Originally posted by Notch1320:
You are better off throwing the MSD Distributor in the garbage.... it will same you money in the end.
Get an RMA number from MSD for the box, and be sure you have it wired correctly. Check your engine grounds too.
There is a reason Nascar guys run two MSD boxes, with a switch!
i had it tested at vh on thier tester...
--------------------
All Bullshit Stops When the Hands Drop
Posts: 726 | From: California | Registered: Oct 2007
| :
|
|
crazyhorse
¯
Member # 5662
|
posted
I had mine tested at vic hubbard too. turned out it was good, it was my main spark wire that was bad and grounding out.
--------------------
1965 Mustang coupe
Posts: 761 | From: Bay Area | Registered: May 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
